SSD1306 0.96'' OLED Display Module Y&B 128x64 Dots 4PIN I2C Interface
0.96 Inch OLED Display Module Y&B 128x64 Dots SSD1306 4PIN I2C Interface
Specifications of a 0.96-Inch OLED Module:
-
Display Size:
-
Diagonal Size: 0.96 inches.
-
Active Area: Approximately 21.74mm x 10.86mm.
-
-
Resolution: Commonly 128x64 pixels
-
OLED Type:
-
Monochrome: Available in single colors like white, blue, or yellow.
-
Bicolor: Displays two colors, such as yellow and blue, split horizontally.
-
-
Driver IC:
-
SSD1306: The most commonly used controller for 0.96-inch OLED displays.
-
SH1106: Another compatible controller, typically with similar functionality.
-
-
Interface:
-
I2C: Default for most 0.96-inch OLED modules; uses two wires (SDA, SCL) for data communication.
-
SPI: Some variants support SPI for faster communication.
-
-
Power Requirements:
-
Voltage: Typically 3.3V or 5V (depending on the module).
-
Low power consumption due to the self-emissive nature of OLEDs.
-
-
Viewing Angle:
-
Wide viewing angles, generally up to 170°.
-
-
Contrast Ratio:
-
Extremely high, typically 10,000:1, ensuring crisp text and graphics.
-
-
Form Factor:
-
Compact and lightweight, making it suitable for space-constrained applications.
-
Detailed Parameters:
| 1 | Brand Name | Genyu |
| 2 | Model Number | GY12864-11YB |
| 3 | Display Mode | OLED(Organic Light Emitting Diode) |
| 4 | Color | Yellow & Blue |
| 5 | Size | 0.96 inch |
| 6 | Dot Matrix | 128*64 Pixels |
| 7 | Module Size | 27.5(W)*27.8(H)*11.3(T) mm |
| 8 | View Area | 23.744(W)*12.864(H) mm |
| 9 | Active Area | 21.744(W)*10.864(H) mm |
| 10 | Dot Size | 0.154(W)*0.154(H) mm |
| 11 | Dot Pitch | 0.170(W)*0.170(H) mm |
| 12 | Drive IC | SSD1306BZ |
| 13 | Connector | COG+FPC |
| 14 | Interface | IIC |
| 15 | Voltage | 3.0V |
| 16 | RoHS Compliant | Yes |
OLED Screens ( 0.42 inch~3.12 inch ):
We mainly develop small-middle sizes OLED displays, including 0.42", 0.49", 0.66", 0.78", 0.87", 0.91", 0.96", 1.12", 1.21", 1.3", 1.5", 1.54", 1.92", 2.08", 2.23", 2.42", 2.7", and 3.12", etc.
Connecting a 0.96-Inch OLED Module:
1. Wiring (I2C Interface):
-
VCC: Connect to 3.3V or 5V power supply (depending on the module).
-
GND: Ground connection.
-
SCL: Connect to the I2C clock pin (e.g., A5 on Arduino Uno).
-
SDA: Connect to the I2C data pin (e.g., A4 on Arduino Uno).
2. Wiring (SPI Interface) (if supported):
-
VCC: Power supply.
-
GND: Ground.
-
SCL: Serial Clock.
-
MOSI: Master Out Slave In.
-
CS: Chip Select.
-
DC: Data/Command Control.
A. 1) Custom Segment LCD Display;
2) Monochrome Graphic/Dot Matrix LCD Display Modules;
3) Micro OLED Display Modules;
4) Color TFT LCD Display Panels;
5) LED Backlights.
2. Q: Where is your factory?
A. Our office is in Shenzhen, Guangdong and our factory is located in Jiangxi Province.
5. Q: Can I get a lower price for OLED displays?
A: Yes, cheaper price with bigger/larger quantities order.
6. Q: How do you control the quality of products?
A: All products are 100% inspected before shipment.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.