128x64 0.96 Inch OLED Display Bicolor SSD1306 30PIN Serial Interface
0.96 Inch OLED Display Bicolor 128x64 Resolution SSD1306 30PIN Serial Interface
Electrical Specifications:
-
Interface:
-
I²C (2-wire) or SPI (4-wire) depending on the module (check before purchase).
-
The I²C interface uses two pins (SCL and SDA) for communication, while SPI uses more (MOSI, MISO, SCK, and CS).
-
-
Power Supply: 3.3V to 5V.
-
Current Consumption:
-
Typically, 20-30mA at full brightness.
-
Power consumption reduces significantly with lower brightness or black screens (because OLED is self-emitting).
-
Display Characteristics:
-
Contrast Ratio: Excellent, with true blacks because the OLED pixels can be completely turned off.
-
Refresh Rate: Fast enough for smooth text and simple graphics (refresh rates of ~60Hz or higher are typical).
-
Font Rendering: Great for displaying text in small sizes, and can support basic pixel graphics.
-
Response Time: Fast response times with no motion blur.
Detailed Parameters:
| 1 | Brand Name | Genyu |
| 2 | Model Number | GY12864-04 |
| 3 | Display Mode | OLED(Organic Light Emitting Diode) |
| 4 | Color | Y&B |
| 5 | Size | 0.96 inch |
| 6 | Dot Matrix | 128*64 Pixels |
| 7 | Module Size |
26.7(W)x19.26(H)x1.41(D) mm
|
| 8 | View Area | 23.74 (W) x 12.864(H) mm |
| 9 | Active Area | 21.74(W)*10.86(H) mm |
| 10 | Dot Size | 0.15(W)*0.15(H) mm |
| 11 | Dot Pitch | 0.17(W)*0.17(H) mm |
| 12 | Drive IC | SSD1306 |
| 13 | Interface | 6800/8080 interface, 4 wire serial interface, I2C |
| 14 | FPC Connector | 30PIN, soldering |
| 15 | Voltage | VDD=1.65~3.3V, Vin=3.5~4.2V |
| 16 | Viewing Angle | 160° |
OLED Screens ( 0.42 inch~3.12 inch ):
We mainly develop small-middle sizes OLED displays, including 0.42", 0.49", 0.66", 0.78", 0.87", 0.91", 0.96", 1.12", 1.21", 1.3", 1.5", 1.54", 1.92", 2.08", 2.23", 2.42", 2.7", and 3.12", etc.
Pinout (for I²C):
The common pinout for a 0.96-inch SSD1306 OLED (I²C) display is:
-
VCC: Power supply (3.3V or 5V depending on your system).
-
GND: Ground.
-
SCL: Serial Clock Line (for I²C communication).
-
SDA: Serial Data Line (for I²C communication).
-
RES: Reset (optional depending on the module).
-
DC: Data/Command (used to indicate if the sent data is a command or display data).
-
CS: Chip Select (used for SPI interface, not needed for I²C).
For SPI, you would also need MOSI, SCK, and CS.
A. 1) Custom Segment LCD Display;
2) Monochrome Graphic/Dot Matrix LCD Display Modules;
3) Micro OLED Display Modules;
4) Color TFT LCD Display Panels;
5) LED Backlights.
2. Q: Where is your factory?
A. Our office is in Shenzhen, Guangdong and our factory is in Jiangxi Province.
5. Q: Can I get a lower price for OLED displays?
A: Yes, cheaper price with bigger/larger quantities order.
6. Q: How do you control the quality of products?
A: All products are 100% inspected before shipment.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.