High Contrast 1.3 Inch OLED Display 128x64 Dots SH1106 30PIN Soldering FPC
1.3 Inch OLED Display White Color 128x64 Dots SH1106 30PIN Soldering FPC
Key Features:
-
Display Size: 1.3 inches diagonally.
-
Resolution: Typically 128x64 pixels (monochrome), but higher resolutions (e.g., 128x128 or 256x128) are possible, especially for color versions.
-
Color: Monochrome (black and white) is most common, but there are color variants (usually RGB, sometimes with a higher resolution).
-
Technology: OLED (Organic Light Emitting Diode), which provides high contrast, low power consumption, and wide viewing angles.
-
Brightness: OLEDs generally have higher brightness and contrast compared to LCDs, and the black levels are true black since the individual pixels emit light directly.
-
Interfaces: Typically available in I2C and SPI interfaces, with I2C being more common for easy wiring.
Detailed Parameters:
| 1 | Brand Name | Genyu |
| 2 | Model Number | GY12864-18 |
| 3 | Display Mode | OLED(Organic Light Emitting Diode) |
| 4 | Color | White |
| 5 | Size | 1.3 inch |
| 6 | Dot Matrix | 128*64 Pixels |
| 7 | Module Size |
34.5(W)x23.0(H)x1.427(D) mm
|
| 8 | View Area |
31.42 (W) x 16.7(H) mm
|
| 9 | Active Area |
29.42(W) x14.7(H) mm
|
| 10 | Dot Size | 0.21(W)*0.21(H) mm |
| 11 | Dot Pitch | 0.23(W)*0.23(H) mm |
| 12 | Drive IC | SH1106G |
| 13 | Interface |
6800/8080 interface, 4 wire serial interface, I2C
|
| 14 | FPC Connector | 30PIN, soldering |
| 15 | Voltage | VDD=1.65~3.3V, Vin=3.5~4.2V |
| 16 | Viewing Angle | 160° |
OLED Screens ( 0.42 inch~3.12 inch ):
We mainly develop small-middle sizes OLED displays, including 0.42", 0.49", 0.66", 0.78", 0.87", 0.91", 0.96", 1.12", 1.21", 1.3", 1.5", 1.54", 1.92", 2.08", 2.23", 2.42", 2.7", and 3.12", etc.
- Most 1.3-inch OLED displays can run on either 3.3V or 5V (depending on the display version). However, if you're using a microcontroller like the ESP32, make sure to power the OLED display with a voltage that matches its requirement (3.3V for some displays).
Common OLED Controller ICs for 1.3-inch Displays:
-
SSD1306: One of the most common controllers used in 1.3-inch OLED displays with 128x64 resolution. It supports both I2C and SPI.
-
SSD1327: Another popular controller used in similar displays, especially for higher resolution or color OLEDs.
-
SH1106/SH1107: Found in some displays with the same or similar form factor and resolution.
Pinout for 1.3-inch OLED Display (I2C version):
If you're using an I2C version of the 1.3-inch OLED display (with a controller like SSD1306 or SSD1327), the typical pinout will be:
-
VCC: Power supply (usually 3.3V or 5V).
-
GND: Ground.
-
SCL: Serial Clock Line (I2C).
-
SDA: Serial Data Line (I2C).
-
RES (Reset): Reset pin (optional for I2C).
-
DC (Data/Command): Data/Command pin (used for SPI, usually tied to ground for I2C).
A. 1) Custom Segment LCD Display;
2) Monochrome Graphic/Dot Matrix LCD Display Modules;
3) Micro OLED Display Modules;
4) Color TFT LCD Display Panels;
5) LED Backlights.
2. Q: Where is your factory?
A. Our office is in Shenzhen, Guangdong and our factory is in Jiangxi Province.
5. Q: Can I get a lower price for OLED displays?
A: Yes, cheaper price with bigger/larger quantities order.
6. Q: How do you control the quality of products?
A: All products are 100% inspected before shipment.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.