OEM ODM Cast Steel Valve Bodies Diaphragm Valve Housings and Fittings
OEM ODM Manufacturers of Cast Steel Valve Bodies, Diaphragm Valve Housings, and Fittings
Overview
The American standard stop valve produced by our company is designed and manufactured in full accordance with American standards, with beautiful and advanced structure. The valve opening and closing parts are valve dances, the flow direction is low in and high out, the stop valve is fully opened and fully closed by the valve stem to operate the valve, and the conical valve dance can play a good throttling role, but cannot play a regulating role. It is mainly used to cut off or connect pipeline media in pipelines under various working conditions such as petroleum, chemical, pharmaceutical, fertilizer, and power industries. The driving methods include manual, gear transmission, electric, pneumatic, etc.
PERFORMANCE PARMETER
| NO | Project name | 150(Lb) | 300(Lb) | 600(Lb) | 900(Lb) | (1500Lb) | 2500(Lb) |
| 1 | PN(MPa) | 2.0 | 5.0 | 10.0 | 15.0 | 25.0 | 45.0 |
| 2 | Case Test preesure(Mpa) | 3.0 | 7.5 | 15.0 | 22.5 | 37.5 | 67.5 |
| 3 | High-pressure sealing Test pressure(Mpa) | 2.2 | 5.5 | 11.0 | 16.5 | 27.5 | 49.5 |
| 4 | Maximum teperature Working pressure(Mpa) | ≤2.0 | ≤5.2 | ≤10.4 | ≤15.6 | ≤25.8 | ≤45.8 |
Probuct specification
| Design | Struture Length | Connection flange | Test and Inspection | ASME B16.34 |
| API 600 | ASME B16.10 | ASME B16.5 | API 598 | ASME B16.34 |
Main components material
| Part Name | Material name | |||||
| Body | A216WCB | A217 WC6 | A351 CF8 | A351 CF8M | A351 CF3 | A351 CF3M |
| Valve cover | A216WCB | A217 WC6 | A351 CF8 | A351 CF8M | A351 CF3 | A351 CF3M |
| Valve plate | A216WCB | A217 WC6 | A351 CF8 | A351 CF8M | A351 CF3 | A351 CF3M |
| Sealing face | 2Cr13 | STL | Body/STL | Body/STL | Body/STL | Body/STL |
| Stem | A180 2 F6a | A182 F11 | A182 F304 | A182 F316 | A182 F304L | A182 F316L |
| Gasket | 304+Flexible graphite | 304+Flexible graphite | 304+Flexible graphite | 304+Flexible graphite | 304+Flexible graphite | 304+Flexible graphite |
| Bolt | A193 B7 |
A193 B7 |
A193 B8 | A193B8M | A193 B8M | A193 B8M |
| Nut | A194 2H | A194 6 | A194 8 | A194 8M | A194 8M | A194 8M |
| Appicable temperature | -29-425℃ | -29-540℃ | -46-425℃ | -46-425℃ | -46-425℃ | -46-425℃ |
| Suitable medium | Water, steam, oil, etc. | Water, steam, etc. | Nitric acid weak corrosive medium | Nitric acid weak corrosive medium | Nitric acid weak corrosive medium | Nitric acid weak corrosive medium |
Types of Stop Valves
Direct current stop valve
In direct current or Y-shaped stop valves, the flow channel of the valve body is in an oblique line with the main flow channel, so that the degree of disruption of the flow state is less than that of a conventional stop valve, and the pressure loss through the valve is correspondingly smaller.
Angle stop valve
In an angle stop valve, the fluid only needs to change direction once, so that the pressure drop through this valve is smaller than that of a stop valve of conventional structure.
Plunger stop valve
In this valve, the valve disc and valve seat are usually designed based on the plunger principle. The valve disc is polished into a plunger and connected to the valve stem. The seal is achieved by two elastic sealing rings on the plunger. The two elastic sealing rings are separated by a collar, and the sealing ring around the plunger is pressed firmly by the load applied to the valve cover by the valve cover nut. The elastic sealing ring can be replaced and can be made of various materials. The valve is mainly used for opening or closing, but with a special form of plunger or special collar, it can also be used to adjust the flow.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.