Kimpok Technology Co., Ltd
                                                                                                           
Verified Supplier
18 Years
Since 2008
Menu

1.2Ghz 10W Image Transmission 1.2G Wireless Video Transmitter 9 CH FPV VTX

Price Negotiable
Price: Negotiation
MOQ: 1 piece
Delivery Time: 3-7 work days
Brand: Kimpok
Product Description

1.2Ghz 10W Image Transmission 1.2G Wireless Video Transmitter with 9 Channels FPV VTX

 

I. Specifications

 

1.1.2Ghz 9CH: 1080MHz-1360MHz;

2. Max power: 10W (1W/2.5W/5W,7.5W,10W adjustable);

3. Input voltage: DC 15V-36V, supporting 4-8S battery input

4. Antenna connector: SMA Mother seat inner hole

5. Smart audio: IRC Tramp

6. Heat-dissipating method: aluminum alloy shell, heat sink&fan

7. Hole spacing: 20mm*20mm/ø2mm

8. Dimension: 65.8mm*37.3mm*19.3mm

9. Weight: 48.15g

 

II. Function Introduction

 

1. Channel indicator: Red LED

2. Band indicator: Blue LED

3. Power indicator: Green LED

4. Band & Channel changer button

5. Power changer button

6. 1.0 6P Power connector

7. SMA Mother seat inner hole

 

III. Control Method and LED Indicator

1. Button ④ is used to switch band and channel; every time when button ④ is pressed for a short time to switch to the next channel, the red LED ①will flash, 1.2.3.4.5.6.7.8.9 in turn. The operation can be cyclic; see the following diagram for details!

 

Short press button ④ to switch channel
Red LED CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9
Flash once Flash twice Flash for 3 times Flash for 4 times Flash for 5 times Flash for 6 times Flash for 7 times Flash for 8 times Flash for 9 times

 

 

2. Button ⑤ is the power adjustment button. Each short press switches the power by one level, cycling through the five levels of 1W, 2.5W, 5W, 7.5W, and 10W. The green LED is the power indicator light, with the following states as shown in the figure below: 1W flashes once, 2.5W flashes twice, 5W flashes three times, 7.5W flashes four times, and 10W flashes five times. Press and hold for 3 seconds to enter pit mode, with the green light staying on. See the figure below for details!

 

Short press button ⑤ Power switch
Green LED Pit Mode 1W 2.5W 5W 7.5W 10W
Everlasting brightness Flashes 1 time Flashes twice Flashes three times Flashes four times Flashes five times

 

Note: This image transmission device has a temperature protection function. When the temperature of the image transmission device exceeds 100°C, the transmission power of the image transmission device will be reduced by one level. If the temperature remains above 100°C, the transmission power will be reduced by another level until it reaches the lowest power level (25mW). At this point, the temperature of the image transmission device will decrease. When the temperature drops to 95°C, the transmission power will return to the originally set power level.

 

 

Get in Touch

Have questions about our products or want to discuss a custom order? Our team is ready to help you.

Company Kimpok Technology Co., Ltd
Location Rm616, Kingsignal signal connection technology industrial park, No. 50 Baolong 2nd road, Longgang district, Shenzhen, Guangdong Province, China
Contact Person Charlene Chen

Request A Quote

Please check your email address.
Your message must be at least 20 characters.