3.3G 4W Video Transmitter with 10km Ultra Long Range for FPV Racing Drones
| Input voltage | 7-26V |
| Extra Features | IRC 4000mW |
| Power Supply | 5v camera @ under 500mA max. |
| Output Power | 2000mW/4000mW |
| Microphone | Not supported |
| Antenna Connector | SMA |
| Cable Connector | JST, 6Pin |
| Dimensions | 50*36*16mm, 30.*44.5mm (hole) |
| Weight | 40.4g |
| Kit Contents | 1x VTX, 1x cable, 1x ANT |
- Support IRC data
- 2000/4000mW power switchable
- Built-in cooling fan
- OSD configuration using IRC
- 7-26V input with 5V output
One button is used to set channel, band and power.
Short press to change 8 channels.
Press the button for 2 seconds, LED will flicker a letter, then short press to change 8 band from A-b-C-d-E-F-G-H
Press the button for 4 seconds, LED will flicker a number quickly, then short press to change 2 power levels, 1 is 2000mW, 2 is 6000mW
Press the button for 5 seconds until the LED displays P, at which point 0dBm. Press and hold for 5 seconds to exit P mode.
The VTX will wait for 3 seconds before turning on power amplifier. The 3 seconds slow power on will protect the VTX from being burned by maximum instantaneous power.
The VTX is fully accessible via IRC data. It supports Pit Mode.
| CH1 | CH2 | CH3 | CH4 | CH5 | CH6 | CH7 | CH8 | |
|---|---|---|---|---|---|---|---|---|
| A | 3360 | 3380 | 3400 | 3420 | 3440 | 3460 | 3480 | 3500 |
| b | 3200 | 3220 | 3240 | 3260 | 3280 | 3300 | 3320 | 3340 |
| C | 3330 | 3350 | 3370 | 3390 | 3410 | 3430 | 3450 | 3470 |
| d | 3170 | 3190 | 3210 | 3230 | 3250 | 3270 | 3290 | 3310 |
| E | 3320 | 3345 | 3370 | 3395 | 3420 | 3445 | 3470 | 3495 |
| F | 3310 | 3330 | 3355 | 3380 | 3405 | 3430 | 3455 | 3480 |
| G | 3220 | 3240 | 3260 | 3280 | 3300 | 3320 | 3340 | 3360 |
| H | 3060 | 3080 | 3100 | 3120 | 3140 | 3160 | 3180 | 3200 |
- BE CAREFUL NOT TO BURN YOUR FINGERS
- PLUG THE ANTENNA BEFORE POWERING THE VTX
- DO NOT REMOVE THE COOLING FAN
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.