• Input voltage: 7-26V
• Extra Features: IRC 6000mW
• Power Supply: 5v camera @ under 500mA max.
• Output Power: 2000mW/6000mW
• Microphone: Not supported
• Antenna Connector: SMA
• Cable Connector: JST, 6Pin
• Dimensions: 50*36*16mm, 30.*44.5mm (hole)
• Weight: 40.4g
• Kit Contents: 1x VTX, 1x cable, 1x ANT

• Support IRC data
• 2000/6000mW power switchable
• Built-in cooling fan
• OSD configuration using IRC
• 7-26V input with 5V output

One button is used to set channel, band and power.

Short press to change 8 channels.

Press the button for 2 seconds, LED will flicker a letter, then short press to change 8 band from A-b-C-d-E-F-G-H

Press the button for 4 seconds, LED will flicker a number quickly, then short press to change 2 power levels, 1 is 2000mW, 2 is 6000mW.

Press the button for 5 seconds until the LED displays P, at which point 0dBm. Press and hold for 5 seconds to exit P mode.

The VTX will wait for 3 seconds before turning on power amplifier. The 3 seconds slow power on will protect the VTX from being burned by maximum instantaneous power.

The VTX is fully accessible via IRC data. It supports Pit Mode.