Self Adhesive Waterproof Membrane Used In Cold Regions 1.2mm1.5mm2.0mm

Product Overview:

The self-adhesive polymer modified asphalt waterproofing membrane is made of synthetic rubber such as SBS, high-quality road   asphalt, and tackifiers as the base material, with polyester film (PET), polyethylene film (PE), aluminum foil or silicon coated  isolation film as the upper surface material, and silicon coated isolation film as the anti sticking layer on the lower surface. It is a  self-adhesive polymer modified asphalt tire free waterproofing membrane.
 

Technical Parameters:

Product Description:

Characteristics of self-adhesive polymer modified asphalt waterproofing membrane:
●Cold construction: no use of open flames, no use of adhesives, energy-saving, environmentally friendly, low-carbon, and economical;
●Excellent adhesive performance, long-term in a viscoelastic state, ensuring the integrity of the waterproof layer;
●High elongation performance and excellent shear strain;
●Excellent low-temperature performance;

Scope of application:

●Waterproofing of non exposed roofs and underground works;
●Waterproofing of municipal engineering such as water channels and swimming pools;
●Waterproofing of subway engineering using open cut method;
●Especially suitable for waterproofing projects that cannot use open flames;
●Excellent low-temperature performance is more suitable for use in cold regions

Company Introduction:

Packaging and transportation:

When buying a product, packaging and transportation matter for its safe arrival. For waterproofing membranes:

• Packaging: Use a roll woven bag and lifting strap.

• Protection: Opt for wooden crates if needed.

• Label: Mark with product name, address, and instructions.

• Transport: We have a pro team and use a good carrier, choosing the method based on quantity, weight, and destination.

• Tracking: You'll get a number to track the shipment.

• Delivery: We'll unload carefully at your spot. Prepare a flat area for unloading.