1.4GHz / 800Mhz 16km Drone Camera Transmitter TCPIP And UDP Long Range HD Video
1.4GHz / 800Mhz 16km Drone Camera Transmitter TCPIP And UDP Long Range HD Video
Description
FNM-8416 uav video transmitter is an end-to-end encrypted low latency hd video transmission system for drones utilizing COFDM technology. It offers full hd IP camera video-link and a bi-directional command and control data link specifically designed for commercial and industrial drones and autonomous UAV systems. The Integrated Data Link System (FNM-8416) is an advanced single unit digital data link system specifically designed for providing reliable broadband communications under high-dynamics for critical UxV applications such as UAV, Drones, and other critical platforms which are sensitive to Size, Weight and Power (SWaP). FNM-8416 is only weighs 65g/2.3oz and it adopts private COFDM protocol, features long range transmission, high sensitivity and high throughput for 14-16km air to ground range.
Key Features
|
 |
- Robust Long Distance Wireless Communication
The low-power RF solution(500mw) which includes the advanced frequency hopping algorithm and the remarkable anti-interference technology makes the communication distance up to 16 kilometers.
- Frequency-Hopping Spread Spectrum(FHSS) for Anti-interference
IWAVE team has its own algorithms and mechanisms for frequency hopping.
During operation, the FNM-8416 digital data link internally calculates and evaluates the current link based on received signal strength RSRP, signal-to-noise ratio SNR, bit error rate SER and other factors. If the judgment condition is satisfied, frequency hopping is performed and an optimal frequency point is selected from the list.
- Coded Orthogonal Frequency Division Multiplexing (COFDM)
Effectively eliminate multipath interference in long-distance transmission
- Ideal for urban and industrial environments
N-LOS communication provides a powerful radio signal while countering interference and overcoming blind spots.
- AES128 Encryption Protection
Prevents the malicious attacks and unauthorized access your video feed in real time without operator intervention.
- Various Ports
FNM-8416 the 1.4Ghz and 800Mhz data and video link supports UART data input and is also equipped with 3 LAN port. Via them users can connect UAV, drones or other unmanned aircraft platform with onboard PC, IP camera or other IP payloads.
Application
FNM-8416 800Mhz and 1.4Ghz datalink is designed to be a professional transmitting and receiving link for drones and uav on industrial application, such as aerial mapping, routing inspection and wildlife protection . It is applied with a brand new RF modulation technology which supports an anti-interference long communication distance at very low transmitting power.
Specification
| Specifications | ||
| Frequency | 800Mhz | 806~826 MHz |
| 1.4Ghz | 1428~1448 MHz | |
| Bandwidth | 8MHz | |
| RF Power | 0.6watt(Bi-Amp, 250mw average power of each power amplifier) | |
| Transmit Range | 800Mhz: 16km1400Mhz: 14km | |
| Transmit Rate | 6Mbps (Video Stream, Ethernet Signal and serial data share)The best video stream: 2.5Mbps | |
| Baud Rate | 115200bps(Adjustable) | |
| Rx Sensitivity | -104/-99dbm | |
| Fault Tolerance Algorithm | Wireless base band FEC forward error correction | |
| Video Latency | The video not be compressed. No latency | |
| Link Rebuild Time | <1s | |
| Modulation | Uplink QNSK/Downlink QNSK | |
| Encryption | AES128 | |
| Start Time | 15s | |
| Power | DC-12V (7～18V) | |
| Interface | 1. Interfaces on Tx and Rx are same 2. Video input/Output: Ethernet×3 3. Power Input Interface×1 4. Antenna Interface: SMA×2 5. Serial×1: (Voltage:±13V(RS232), 0~3.3V(TTL) |
|
| Indicators | 1. Power 2. Ethernet Status Indicator 3. Wireless Connection Setup Indicator x 3 |
|
| Power Consumption | Tx: 5WRx: 3.5W | |
| Temperature | Working: -40 ~+ 85℃Storage: -55 ~+85℃ | |
| Dimension | Tx/Rx: 57 x 55.5 x 15.7 mm | |
| Weight | Tx/Rx: 65g | |
| Design | CNC Technology | |
| Double Aluminum Alloy Shell | ||
| Conductive anodizing craft | ||
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.