Miniature 33g Drone Video Transmitter 10km Downlink IP MESH Embedded Module
Price:
Negotiable
MOQ:
2
Delivery Time:
5-10days
Brand:
IWAVE
Product Description
Miniature 33g Drone video transmitter 10km downlink
Description
Integrate the FD-7800 IP MESH Embedded Module into your products to unite UAVs, UGVs, and sensors on a single mesh network. Because the Embedded Module features a 100Mbps bandwidth for HD video and serial data based IP, which can eliminate redundant equipment from your platform.The FD-7800 can support up to 8 nodes, up to 6 levels of jumping, the total uplink and downlink bandwidth is up to 100Mbps, and the communication distance can reach 10km (line-of-sight) and 1-3km(non line of sight)
Key Features
- Supports Ethernet and full duplex telemetry data transmission.
- It adopts the Automatic frequency hopping technology for anti-interference greatly reduce system power consumption and size of the module.
- The miniature, lightweight and robust design allows the FD-7800 to be an ideal candidate for size sensitive applications. The high speed, long range capabilities of the FD-7800 allow for high quality wireless video and telemetry communications.
- Supports 600(566-678Mhz) and 1.4Ghz(1420-1530Mhz) adjustable by software.
- Supports up to 8 nodes of dynamic networking, and the maximum distance of a single hop is 5KM.
- Supports up to 7 cascade jumps. In an ideal situation (adjacent node SNR ≥ 15), the terminal transmission rate can reach 6Mbps.
- Lower power consumption, supports sleep mode. Average standby power consumption (connected state, no data transmission) <2W, typical working power consumption <10w (high bandwidth data transmission).
Application
- Ethernet Wireless Extension
- UGV Fleet Communication and management.
- Mobile Team Communication
- UAV Swarm Wireless Communication
- Wireless Telemetry Data
- Wireless Video
- Control Systems for Unmannded Platform
Specification
| Wireless | |
| Technology | Wireless based on TD-LTE Technology Standard |
| Encryption | ZUC/SNOW3G/AES(128) Optional Layer-2 |
| Data Rate | Max 120Mbps(Uplink and Downlink) |
| Communication Range | Air to ground 10km NLOS Ground to ground 1-3km |
| Node | 8 node |
| MIMO | 2x2 MIMO |
| RF Power | 23dBm±2 (2w, 5w or 10w on request) |
| Latency | End to end≤5ms-15ms |
| Modulation | Adaptive QPSK, 16QAM, 64QAM |
| Anti-Jamming | FHSS(Frequency Hop Spread Spectrum) |
| Bandwidth | 1.4Mhz/3Mhz/5Mhz/10MHz/20MHz |
| Power Consumption | 5watts |
| Power Input | DC5-32V |
| Dimension | 72*60*10mm |
| Weight | 33g |
| Serial Data | RS232/TTL |
| Communication | Full duplex communication |
| Up and Down Ratio | 2D3U/3D2U/4D1U/1D4U |
| Automatic Reconstruction | Automatic re-establishment after link failure/ re-deploy the network after a link failure |
| Dual Band Frequency | 1.4G: 1420Mhz-1530MHz |
| 600Mhz: 566Mhz-678Mhz | |
| Interface | |
| RF | 2 x SMA |
| LAN Port | 2x Ethernet Port |
| Comuart | 1xCOMUART TTL 3.3V level, 1 start bit, 8 data bits, 1 stop bit , no parity check Baud Rate: 115200bps(Default) (57600, 38400, 19200, 9600 configurable) |
| Power Input | 1xDC INPUT: DC5-32V |
| Sensitivity | |
| 1.4GHZ | 20Mhz: -102dBm |
| 10Mhz: -100dBm | |
| 5Mhz: -96dBm | |
| 600Mhz | 20Mhz: -102dBm |
| 10Mhz: -100dBm | |
| 5Mhz: -96dBm | |
| Environment | |
| Working Temperature | -40℃~+80℃ |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
IWAVE COMMUNICATIONS CO.,LTD
Location
No.858 Longhua East Road, Huangpu District, Shanghai, China
Contact Person
Mia