PCB Size

46.58±0 .15mm

52.00±0.15mm  

2.90±0.10mm

RF

Frequency

1.4Ghz: 1420-1530MHz

600Mhz: 566-678MHz

RF Power Level

23dBm±2(1.4Ghz)

23dBm±2(600MHz)

Sensitivity

1Mbps

1.4Ghz(14700 frequency point)

20MHz: -102dBm

10MHz: -100dBm

5Mhz: -96dBm

600Mhz(6200 frequency point)

20Mhz: -102dBm

10MHz: -100dBm

5MHz: -96dBm

5Mbps

1.4Ghz(14700 frequency point)

20MHz: -95dBm

10MHz: -87dBm

5Mhz: -85dBm

600Mhz(6200 frequency point)

20MHz: -95dBm

10MHz: -87dBm

5MHz: -85dBm

Interface

UART

3

HSIC

USB 2.0 High Speed

USB

USB 2.0 High Speed

I2C

2

GPIO

23

JTAG

0

Antenna

2

Power

VSYS

3.7V~4.35V(4V is suggested)

D1V8A

1.8V Power Output

D2V85A

2.85V Power Output

VCC_D3V3

3.3V Power Output

5V_FEM

Powering the RF PA chip

Master-slave node

Central Node  Configuration

Any node in the network can be configured as the master node.

Data Rate

All nodes share uplink and downlink system capacity data rate

Capacity

Supports the number of network nodes N≥2 and up to 64 service nodes or 63 IDLE state nodes.

Communication Mode

Any node in the network can be configured as the master node.

All nodes share uplink and downlink system capacity data rate

Access

Support multiple slave nodes to access the network simultaneously.

Data Rate

All slave nodes and master nodes share the working

bandwidth in one direction. Concurrent upstream and downstream (20Mhz, not less than 100Mbps)

Connection Status

All nodes in the network remain connected at all times.

Power Control

Adaptive adjust transmit power.

Boot up

Both master node and slave nodes support preset

Fixed Power

Fixed power configuration(modify master node only)

Fixed Frequency

Locking frequency configuration