Ethernet And Full Duplex TTL Serial Wireless Data Link For Unmanned System
FDM-6680 is a wireless transmission product designed by IWAVE based on mature SOC chipset, which supports point to point and point to multi-point. 1 maseter node supports up to 8 sub-nodes to shares 120Mbps bandwidth for video and data transmitting.
-
FDM-6680 is designed based on TD-LTE wireless communication standard, OFDM and MIMO technologies. It doesn't rely on any carrier's base station.
-
Supports Ethernet and full duplex TTL data transmission. And the control data transmission is higher priority than network signal.
-
It adopts the Automatic frequency hopping technology for anti-interference greatly reduce system power consumption and size of the module.
The FDM-6680 is well-suited for various applications, including:
-
Surveillance Systems: For real-time video monitoring and data transmission.
-
Industrial Automation: Enabling communication in smart manufacturing environments.
-
Broadcasting: Facilitating reliable live video feeds.
-
Remote Sensing: Supporting data collection from remote locations.
If you have any further questions or need more specific information, feel free to ask!
P1: USB Interface, P2: Ethernet Port, P3: Ethernet Port & POE, P4: Power Input
P5: DBB_COMUAR, P6: UART0, P7: RF Port, P8: RF Port, P9: DBB_RFGPO, P10: DBB_RFGPO
| GENERAL | ||
|---|---|---|
| TECHNOLOGY | Wireless based on TD-LTE Technology Standards | |
| ENCRYPTION | ZUC/SNOW3G/AES(128) Optional Layer-2 | |
| DATA RATE | Max 120Mbps(Uplink and Downlink) | |
| RANGE | 10km-15km(Air to ground)500m-3km(NLOS Ground to ground) | |
| CAPACITY | Point to 8-Point | |
| MIMO | 2x2 MIMO | |
| POWER | 23dBm±2 (2w or 10w on request) | |
| LATENCY | End to end≤20ms-50ms | |
| MODULATION | QPSK, 16QAM, 64QAM | |
| ANTI-JAM | Automatically Cross-Band frequency hopping | |
| BANDWIDTH | 1.4Mhz/3Mhz/5Mhz/10MHz/20MHz/40Mhz | |
| POWER CONSUMPTION | 5Watts | |
| POWER INPUT | DC12V | |
| WIRELESS | ||
|---|---|---|
| COMMUNICATION | Communication between any 2 slave nodes must be forwarded through the master node |
|
| MASTER NODE | Any node in the network can be configured as the master node. | |
| SLAVE NODE | All nodes support unicast, multicast, and broadcast | |
| ACCESS | Multiple slave nodes can access the network simultaneously. | |
| 1.4GHZ | 20MHZ | -102dBm |
| 10MHZ | -100dBm | |
| 5MHZ | -96dBm | |
| 600MHZ | 20MHZ | -102dBm |
| 10MHZ | -100dBm | |
| 5MHZ | -96dBm | |
| FREQUENCY BAND | ||
|---|---|---|
| 1.4Ghz | 1420Mhz-1530MHz | |
| 600Mhz | 566Mhz-678Mhz | |
| MECHANICAL | ||
|---|---|---|
| TEMPERATURE | -40°C~+80°C | |
| WEIGHT | 60grams | |
|
INTERFACES |
||
| RF | 2 x SMA | |
| ETHERNET | 2xEthernet | POE |
| Ethernet port for data(4Pin) | ||
| COMUART | 1xCOMUART | RS232 3.3V level, 1 start bit, 8 data bits, 1 stop bit , no parity check |
| Baud Rate: 115200bps(Default) (57600, 38400, 19200, 9600 configurable) |
||
| POWER | 1xDC INPUT | DC12V |
| USB | 1xUSB | |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.