30Mbps Digital Wireless Video Transmitter Unmanned System For Unmanned Excavators
Wireless Digital Video Transmitter For Unmanned Excavators
Description
The FDM-615PTM is an advanced wireless communication module leveraging Frequency Hopping Spread Spectrum (FHSS) technology for superior immunity to noise and interference. It delivers reliable, long-distance, full-duplex Ethernet/serial communication in a compact and robust form factor, making it ideal for micro unmanned platforms.
The FDM-615PTM is the ultimate solution for secure, high-quality wireless communication on micro unmanned platforms, offering reliability, versatility, and performance for critical operations.
Key Features
|
Key Features:
-
Robust Long-Range Communication
Offers clear and stable NLOS video transmission with a range of 1-10 km for ground-to-ground applications.
-
Encrypted Transmission
Adopts AES128 encryption to protect video feeds from unauthorized access or interception.
-
Compact and Lightweight Design
Weighing just 280g, it is perfect for integration into small unmanned platforms while offering 10 watts transmitting power.
-
Plug and Play
Simplifies deployment with a user-friendly setup process, eliminating the need for complex binding procedures.
-
Dynamic Frequency and Power Control
Automatically adjusts frequency selection and transmitting power based on RF environment conditions to minimize interference and optimize performance.
Application
-
Autonomous Unmanned Platforms
Designed for unmanned excavators, tractors, cranes, robots, and vehicles, ensuring reliable video and telemetry communications.
-
Industrial and Tactical Operations
Supports operations in harsh RF environments, including urban, forested, and mountainous areas.
-
OEM Integration
Provides an API document and strong R&D support for OEMs to facilitate secondary development and seamless integration.
Specification
| GENERAL | ||
| Technology | Wireless based on TD-LTE Technology Standards | |
| Encryption | ZUC/SNOW3G/AES(128) OptionalLayer-2 | |
| Data Rate | 30Mbps(Uplink and Downlink) | |
| Range | 100km-150km(air to ground) | |
| Capacity | 32Nodes | |
| NLOS Range | 5-10km nlos ground to ground | |
| RF Power | 10Watts | |
| Latency | End to End: 60ms-80ms | |
| Modulation | QPSK, 16QAM, 64QAM | |
| Anti-jamming | Automatically frequency hopping | |
| Bandwidth | 1.4Mhz/3Mhz/5Mhz/10MHz/20MHz | |
| SENSITIVITY | ||
| 2.4GHZ | 20MHZ | -99dBm |
| 10MHZ | -103dBm | |
| 5MHZ | -104dBm | |
| 3MHZ | -106dBm | |
| 1.4GHZ | 20MHZ | -100dBm |
| 10MHZ | -103dBm | |
| 5MHZ | -104dBm | |
| 3MHZ | -106dBm | |
| 800MHZ | 20MHZ | -100dBm |
| 10MHZ | -103dBm | |
| 5MHZ | -104dBm | |
| 3MHZ | -106dBm | |
| FREQUENCY BAND | ||
| 2.4Ghz | 2401.5-2481.5 MHz | |
| 1.4Ghz | 1427.9-1447.9MHz | |
| 800Mhz | 806-826 MHz | |
| POWER | ||
| Power Input | DC 24V+-10% | |
| Power Consumption | 30watts | |
| COMUART | ||
| Electrical Level | 2.85V voltage domain and compatible with 3V/3.3V level | |
| Control Data | TTL mode | |
| Baud rate | 115200bps | |
| Transmission Mode | Pass-through mode | |
| Priority level | l Higher priority than the network port. When the signal transmission is crowed, the control data will be transmitted in priority | |
| Note:l The data transmitting and receiving is broadcast in the network. After successful networking, each FDM-615PTM node can receive serial data.l If you want to distinguish between sending, receiving and control, you need to define the format yourself | ||
| INTERFACES | ||
| RF | 2 x SMA | |
| Ethernet | 1xJ30 | |
| COMUART | 1xJ30 | |
| Power | 1xJ30 | |
| Debug | 1xJ30 | |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.