UGV Wireless Communication Link NLOS 3KM FHSS UHF and L Band
FDM-6823UG Wireless Data Link - High-Performance UGV Communication Solution
The FDM-6823UG is a high-performance wireless data link system designed by IWAVE specifically for unmanned ground vehicles (UGVs). Combining advanced 2x2 MIMO technology, frequency-hopping sequence synchronization (FHSS), and dual-band support, it provides ultra-high bandwidth and robust anti-interference capabilities, ensuring stable and efficient data and video transmission in complex environments. Whether operating in urban environments, mountainous terrain, or other harsh conditions, the FDM-6823UG maintains reliable communication, meeting the high-performance communication requirements of modern unmanned systems.
- Dual-band support: Supports both 600 MHz and 1.4 GHz frequency bands, easily switching via software to adapt to diverse communication environments.
- Up to 100 Mbps data rate: Provides ultra-high bandwidth of 100 Mbps in both uplink and downlink, ensuring real-time transmission of high-definition video and data.
- Powerful non-line-of-sight (NLOS) capabilities: Supports ground-to-ground communication from 500 meters to 3 kilometers, ensuring stable communication even in the presence of obstacles.
- Supports up to 8 nodes: Supports up to 8 nodes in a network, making the system scalable and adaptable to large-scale deployments.
- 2x2 MIMO technology: 2x2 MIMO technology improves data rates and connection stability, enhancing long-distance communication capabilities.
- FHSS (Frequency Hopping Sequence) function: Automatic frequency hopping effectively avoids interference sources, ensuring stable wireless communication.
- Adjustable Power Range: Supports adjustable power from 2W to 5W, allowing users to adjust signal strength and optimize power consumption based on actual needs.
- High Compatibility: Supports standard Ethernet and serial communication interfaces, compatible with a wide range of devices, and easily integrated into existing unmanned systems.
- Low-Latency Communication: Provides air interface latency of less than 30 milliseconds, ensuring uninterrupted real-time video and data transmission.
- Powerful Network Management: Through the web UI and management software, users can monitor and configure each node in the network and obtain real-time signal quality and link status information.
|
|
Powerful Non-Line-of-Sight (NLOS) Communication Capabilities: |
| General | Wireless | |||
| Technology | Wireless based on TD-LTE Technology Standards | Communication |
1T1R 1T2R 2T2R |
|
| Video Transmission | 1080p HD video transmission, H.264/H.265 adaptive | IP Data transmission | Supports data transmission based on IP packets | |
| Eencryption | ZUC/SNOW3G/AES(128) Optional Layer-2 | Data Link | Full duplex communication | |
| Data Rate | Max 100Mbps(Uplink and Downlink) | Up & Down Ratio | 2D3U/3D2U/4D1U/1D4U | |
| Range |
30km(Air to ground(LOS) UGV: 500meters-3km Ground to ground(NLOS) |
Automatic Reconstruction Chain | Automatic link re-establishment after link failure/ re-deploy the network after a link failure | |
| Capacity | 8 nodes | Sensitivity | ||
| MIMO | 2x2 MIMO | 1.4GHZ | 20MHZ | -102dBm |
| Transmitting Power | 5watts(2W~5W adjustable via software) | 10MHZ | -100dBm | |
| Latency | Air interface delay<30ms | 5MHZ | -96dBm | |
| Modulation | QPSK, 16QAM, 64QAM | 600MHZ | 20MHZ | -102dBm |
| Anti-Jamming | Frequency Hopping and Adaptive Modulation | 10MHZ | -100dBm | |
| Bandwidth | 1.4Mhz/3Mhz/5Mhz/10MHz/20MHz/40Mhz | 5MHZ | -96dBm | |
| Power Consumption | 30Watts | Dual Frequency Band(Software Selectable) | ||
| Voltage and Current | DC12-30V | 1.4Ghz | 1420Mhz-1530MHz | |
| Dimension | 12.7*9.4*1.8cm | 600Mhz | 566Mhz-678Mhz | |
Q1: What types of communications does the FDM-6823UG support?
A1: The FDM-6823UG supports wireless transmission of high-definition video, data, and serial control signals, and is widely used in unmanned ground vehicles, robotics, and other fields.
Q2: How do I switch frequency bands?
A2: Users can select either the 600 MHz or 1.4 GHz frequency band through simple software configuration, allowing for flexible switching to meet different application requirements.
Q3: How is the FDM-6823UG's interference immunity?
A3: The FDM-6823UG uses frequency hopping sequence (FHSS) technology, combined with 2x2 MIMO technology, to automatically avoid interference in crowded environments, ensuring a stable communication link.
Q4: What communication protocols does the FDM-6823UG support?
A4: The FDM-6823UG supports multiple protocols, including Ethernet, TCP, UDP, MQTT, and Modbus, enabling easy integration into various control and data transmission systems.
Q5: How many nodes does each network support?
A5: The FDM-6823UG supports up to 8 nodes, making it suitable for large-scale network deployment and expansion.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.