CNC Controlled Mesh Wire Making Machine Light Duty BWR1600B Wire Mesh Loom Machine
Efficient CNC Controlled Light Duty Metal Wire Mesh Loom BWR1600B
1. Light Duty Metal Wire Mesh Loom Introduction
The BWR1600B is a light-duty, CNC-controlled wire mesh loom built on a rigid 1,600 mm chassis for stable, repeatable production. An industrial PLC with servo drives precisely coordinates warp let-off, beat-up, and take-up, while closed-loop tension control keeps aperture and density within tight tolerances. Mesh count and tension are digitally set and stored via the touch HMI, enabling fast, recipe-based changeovers and consistent quality across shifts. Typical capability (project-dependent): plain weave ~30–500 mesh/inch with fine wire handling down to ~Ø 0.01–0.20 mm; supports plain, twill, and Dutch weaves for broader process coverage.
2. Light Duty Metal Wire Mesh Loom Application Scenarios
Designed for precision and fine-wire work, the BWR1600B excels in filtration media, laboratory and pilot-line meshes, electronics and battery screens, catalyst support cloth, and architectural protection panels where flatness, clean selvedges, and dimensional consistency matter. Plants running multi-SKU programs benefit from quick spec switches and stable long runs, while OEMs and converters can integrate optional uncoiling, pre-straightening, cutting, edge-handling, and take-up modules to match downstream processes and target takt times.
3. Light Duty Metal Wire Mesh Loom Key Advantages
Engineered for uptime and ease of use, the BWR1600B combines servo synchronization with closed-loop tension to deliver stable geometry and smooth surfaces at speed. Recipe governance reduces operator variability and shortens setup time, lifting OEE and first-pass yield. A reinforced frame minimizes vibration, while service-friendly access and standardized wear parts simplify maintenance and lower total cost per square meter of mesh. ERP-ready order/BOM linkage (if enabled) provides progress visibility and material/batch traceability for audited production.
4. Light Duty Metal Wire Mesh Loom Parameter:
|
Feature Category |
Light-duty Loom (Model B) |
Heavy-duty Loom (Model D) |
|
|
Mesh Width |
1300mm 1600mm |
1300mm 1600mm |
|
|
Harness System |
Positive (Overhead) |
Negative (Bottom Cam) |
|
|
Web Removal Method / Doffing Method |
Continuous Web Removal or Direct Winding |
Continuous Web Removal or Direct Winding |
|
|
Wire Diameter Range |
Continuous Web Removal |
0.01 - 0.2 mm |
0.1 - 0.6 mm |
|
Direct Winding |
0.03 - 0.2 mm |
0.1 - 0.3 mm |
|
|
Mesh Count Range |
Plain Weave |
30 - 500 mesh/inch |
10 - 100 mesh/inch |
|
Twill Weave |
30 - 635 mesh/inch |
20 - 100 mesh/inch |
|
|
Dutch Weave |
100 - 2300 mesh/inch |
30 - 500 mesh/inch |
|
|
Beating-Up Frequency |
Max. 120 r/h |
Max. 100 r/h |
|
|
Motor Power |
2.2kw |
2.2kw |
|
|
Standard Configuration |
Crankshaft Type |
Bushing Type |
|
|
Side Frames |
Casting Wall Plates |
||
|
Tension System |
Tension Sensor |
||
|
Rapier Head Type |
Carbon Fiber |
||
|
Drive Type |
Fully Digital Control (CNC) |
||
6. Light Duty Metal Wire Mesh Loom Detailed Images:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.