Single Arm Drop Test Machine Carton Falling Drop Impact Tester

Product description

This machine is specially designed for testing the damage of product packaging by falling, and evaluating the impact strength during transport and handling. It can make free fall test on the face, corner and angle of the package, equipped with digital height display and adopts decoder for height tracking, so that it can accurately give the height of the product falling, and the error of the preset falling height is not more than 2% or 10mm. This machine adopts single column structure, with electric reset, electric fall control and electric lifting device, easy to use; accurate falling height, intuitive display, smooth lifting and lowering of the falling arm and small error of falling angle. The fall angle error is small.

Applicable standard

GBT 21599-208,ISO2248,JISZ0202-87,GB/T4857.5-92

Environmental requirement

1. Site temperature: 5 ℃ ~ +28 ℃ (average temperature within 24 hours ≤ 28 ℃);

2. Relative humidity: ≤ 85% RH;

3. Power supply conditions: single-phase three-wire;

4. Voltage range: AC220V;

5. Frequency fluctuation range: (50 ± 0.5) Hz;

6. Protective earth ground resistance is less than 4 Ω;

7. Users are required to configure the equipment with the appropriate capacity of air or power switches at the installation site, and this switch must be independent for the use of this equipment. or power switch, and this switch must be independent for the use of this equipment.

Main Parameters

1. Model: GC-315

2. Drop height: 300-1500mm, adjustable

3. Measurement of the maximum weight: 0-65kg

4. Maximum size of the test piece: 800 * 800 * 800mm

5. Impact panel size: 1700 * 1200 * 14 (solid iron plate, thickness 14mm)

6. Bracket arm Size: 160 * 180 * 8mm

7. Drop error: <2 °

8. Drop height error: ± 10mm

9. Control box size: 370 * 350 * 910mm

10. Test bench dimensions: about 1700 * 1200 * 2300mm

11. Equipment weight: about 550kg

12. Power supply: AC220V 50HZ (please confirm the site power supply, if you need to replace the other voltage need to be prepared in advance. If you need to replace the other voltage need to be noted in advance offer)

13.Power: 1.5KW