Programmable Fluorescence UV Accelerated Weathering Machine High Pressure Aging Test Chamber
ASTM G154 Programmable UV Weathering Aging Environmental Test Chamber
Model: GC-UV-A
Product Introduction
The test equipment simulates the damage caused by the sun's ultraviolet light, and the weather resistance test is carried out on the material by exposing the tested material to light under controlled high temperature. It uses ultraviolet lamps to simulate the radiation of sunlight, and simulates dew and rain through condensation and water spraying. In just a few days or weeks, the ultraviolet irradiation equipment can reproduce the effects of outdoors that take months or even years. Damage that takes time to occur, including fading, color change, tarnish, chalking, cracking, cracks, wrinkling, blistering, embrittlement, strength reduction, oxidation, etc. The test results can be used to select new materials and improve existing There is a change in the material, or the formulation of the evaluation material.
| GB/T14522-1993 | Accelerated test method for artificial climate of plastics, coatings and rubber materials used in machinery industry products |
| ISO 11507.1997 | The paint and varnish coatings are exposed to artificial differentiation, fluorescent UV lamps and water |
| GB /T16422.1-2006 | Test method for exposure to laboratory light sources of plastics |
| ASTM D4329 | Standard Test Method for Fluorescence UV Exposure Testing of Plastics |
| GB /T 16585-96 | UV aging test chamber standard |
| ASTM D1148-2007 | Chinese version of rubber UV light discoloration standard |
| Model | GC-UV-A | |
| Dimensions of the working chamber (cm) | 45*117*50CM | |
| Boundary dimension(cm) | 70*135*145CM | |
| Power | 4.0(KW) | |
| Performance index |
Temperature range | Rt+10ºC~70ºC |
| Humidity range | ≥95%R.H | |
| Distance between lamps | 35mm | |
| Distance between sample and lamp | 50mm | |
| Support quantity of the sample | Length 300mm* width 75mm, about 48 pieces | |
| Ultraviolet wavelengths | 290nm~400nm UV-A340,UV-B313,UV-C351( instructions at time of order ) | |
| Lamp power | 40W | |
| Control system |
Controllor | touch screen microcomputer controller |
| Illumination heating system | Fully independent system, nickel-chromium alloy electric heating heater | |
| Condensation humidification system | All stainless steel shallow surface evaporative humidifier | |
| Blackboard temperature | Bimetal blackboard thermometer | |
| Water supply system | Automatic control for humidification and water supply | |
| Exposure method | Exposure to moisture condensation, exposure to light radiation | |
| Safety protection | Leakage, short circuit, over temperature, water shortage, over current protection | |
Technical Features
- Provide comprehensive and detailed real-time monitoring and curve recording (controller with recorder function) for important test parameters such as irradiance, temperature, time, etc. Reports and curve printing can also be generated through the computer.
- Radiation/condensation/water spray test can be carried out independently, and any combination of radiation/condensation/water spray test can also be programmed.
- It adopts Taiwan industrial level 7-inch true color touch screen control system, which has good stability, monitoring, operability and maintainability.
- Provide life reference for ultraviolet lamps with expensive materials (the lamps are consumables with a lifespan of about 1600 hours), which is convenient for users to confirm the replacement time of the lamps and saves the cost of use.
- Adopt automatic water supply and drainage design, and use high-cost high-power water mercury to ensure the flow rate and uniformity of water spray.
- Most of the main components are international brands, and a small part are domestic brands, which improves the safety and reliability of the product. (For details, please refer to the attached list of main accessories.)
- The installation and wiring of the electrical part of the equipment shall be carried out in accordance with international electrical standards. Perfect and professional after-sales service.
Packing&Delivery
FAQ
Q: Are you a factory or a trading company?
A: We are a professional OEM testing equipment manufacturer.
Q: Why choose us?
A: We are a professional OEM manufacturer with 15 years of experience in R&D and production of polymer plastic testing instruments, and can provide production and processing customization.
Q: How can we guarantee the quality?
A: Always a pre-production sample before mass production and always a final inspection before shipment.
Q: What's the delivery time?
A: Within 10 working days after deposit is received. If we have products in stock or urgent orders, the delivery time will be shortened.
C: Mhat about the after-sale service?
A: Every machine from our factory has 12 months warranty. And we also provide life-long paid repair or service.
Q: What services can we provide?
A: Accepted Delivery Terms: EXW/ FOB/CIF and so on.
Accepted Payment Type: T/T.Pay Pal:
Language Spoken: English, Chinese
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.