TFT 2.2 Inch LCD Display Module 240 X 320 MCU Standard ST7789V2-G4
Price:
can be negotiated
MOQ:
500 PCS
Delivery Time:
5~14 working days
Brand:
ESEN
Product Description
TFT 2.2 Inch LCD Display Module 240 X 320 MCU Standard ST7789V2-G4
Product Specifications
| Attribute | Value |
|---|---|
| Size | 2.2-Inch |
| Dimension | 38.68(W)* 55.14(H) * 2.35(T) |
| Active Area | 33.84* 45.12 mm |
| Number Of Dots | 240 * RGB * 320 |
| LCD Type | a-Si TFT |
| Viewing Direction | 12 o'clock |
| Driver IC | ST7789V2-G4 |
| Interface Type | MCU |
| Operating Temperature | -20℃~ 70℃ |
| Storage Temperature | -30℃~ 80℃ |
| Backlight Type | 4 LEDs |
| Luminance | Customizable |
| POL | UP 0.22/below 0.22 |
| Custom Service | FPC, CTP (capacitive touch panel), RTP (resistive touch panel), pin definition, packing, HD-MI board |
Product Description
2.2 Inch TFT LCD Module 240*320 MCU Standard TFT LCD Display
Mechanical Drawing
Pin Assignments
| NO | Symbol | Description |
|---|---|---|
| 1 | GND | Ground |
| 2-5 | NC | NC |
| 6 | IMO | I/O choose |
| 7-9 | NC | NC |
| 10 | RESET | Reset pin |
| 11-14 | NC | NC |
| 15-22 | DB17-DB10 | Data Bus |
| 23 | NC | NC |
| 24-31 | DB8-DB1 | Data Bus |
| 32-34 | NC | NC |
| 35 | RD | Read signal, rising-edge-active |
| 36 | WR | Write signal, rising-edge-trigger |
| 37 | RS | Data/Command register address |
| 38 | CS | Chip enable, Low-active |
| 39 | VCC | POWER SUPPLY |
| 40 | VCC | POWER SUPPLY |
| 41 | LEDK | BACKLIGHT CATHODE |
| 42-44 | LEDA | BACKLIGHT ANODE |
| 45 | GND | Ground |
Storage Method
- Store in an ambient temperature of 23°C±5°C, and in a relative humidity of 55%±15%. Don't exceed 12 months and expose to sunlight or fluorescent light.
- Store in a clean environment, free from dust, active gas, and solvent.
- LCM module is stored in warehouse, Store in antistatic container. There may be air bubbles between the protective film on the surface of polarizer and polarizer. It can only be found under LED light. Before production, IQC should be inspected directly by LED light. If residual traces are found, alcohol should be used to wipe them.
Similar Products
Related Videos
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
ESEN HK LIMITED
Location
Unit 901B, 9th Floor, Block D, Cai Fu Gang International Building, Bao Yuan Road, Bao An District, Shenzhen,China
Contact Person
james