2.9 inch Tri-Color E Ink Display Fast Refresh, Zero Static Power, Perfect for Smart Labels & Battery-Free IoT
Price:
can be negotiated
MOQ:
2000 PCS
Delivery Time:
15~20 working days
Brand:
ESEN
Product Description
2.9 inch Tri-Color E Ink Display
Fast Refresh, Zero Static Power, Perfect for Smart Labels & Battery-Free IoT
Critical Note
Always validate driver IC compatibility (e.g., SSD1680, UC8179). Waveform LUTs (Look-Up Tables) for tri-color + fast refresh differ from monochrome displays.
Suggested Troubleshooting Tools:
- Logic analyzer for SPI signals
- Temperature-controlled testing environment
- epdiy firmware (open-source EPD debugger)
Let me know if you need protocol details or waveform configuration examples!
Product:
2.9 Inch Eink EPaper Display
Resolution:
296 X 128 Dots Resolution
Display Mode:
Active Matrix Electrophoretic Display (AM EPD)
Optics:
All Viewing Angles
Outline Dim.:
79.0(H) X 36.7(V) X 1.0(T) Mm
Active Area:
66.896(H) X 29.056(V) Mm
Pixel Pitch:
227 X 226 (112dpi) Um
Operating Temp:
0°C To +40°C
Storage Temp:
-25°C To +60°C
Color:
Black/White/Red
Surface Treatment:
Anti-Glare, 3H
Pin Number:
24 Pins
Interface:
SPI
Pixel Arrangement:
Vertical Stripe
Input Current:
3.1 MA
Compliance:
Rohs & Reach Compliant
Interface Pin Definition
| Pin# | Single | Description | Remark |
|---|---|---|---|
| 1 | NC | No connection and do not connect with other NC pins | Keep Open |
| 2 | GDR | N-Channel MOSFET Gate Drive Control | |
| 3 | RESE | Current Sense Input for the Control Loop | |
| 4 | NC | No connection and do not connect with other NC pins | Keep Open |
| 5 | VSH2 | Positive Source driving voltage | |
| 6 | NC | No connection and do not connect with other NC pins | Keep Open |
| 7 | NC | No connection and do not connect with other NC pins | Keep Open |
| 8 | BS1 | Bus selection pin | Note 6-5 |
| 9 | BUSY | Busy state output pin | Note 6-4 |
| 10 | RES # | Reset signal input. | Note 6-3 |
| 11 | D/C # | Data /Command control pin | Note 6-2 |
| 12 | CS # | The chip select input connecting to the MCU. | Note 6- 1 |
| 13 | SCL | Serial clock pin for interface. | |
| 14 | SDA | Serial data pin for interface. | |
| 15 | VDDIO | Power input pin for the Interface. | |
| 16 | VCI | Power Supply pin for the chip | |
| 17 | VSS | Ground (Digital) | |
| 18 | VDD | Core logic power pin | |
| 19 | VPP | Power Supply for OTP Programming | |
| 20 | VSH1 | Positive Source driving voltage | |
| 21 | VGH | Power Supply pin for Positive Gate driving voltage and VSH | |
| 22 | VSL | Negative Source driving voltage | |
| 23 | VGL | Power Supply pin for Negative Gate driving voltage, VCOM and VSL | |
| 24 | VCOM | VCOM driving voltage |
Product Overview
The EPD-290BWR is a high-resolution, low-power electronic ink display module that is highly suitable for a wide range of applications. It measures 2.9 inches, has a resolution of 128×296, and supports black, white and red. It can be used to display text, images and graphics clearly and efficiently.
Main Features
- High resolution: 112dpi, capable of easily displaying fine patterns
- Low power consumption: Requires very little power during updates and can maintain images without power
- Ultra-wide viewing Angle: Nearly 180°, allowing for easy viewing from any Angle
- Ultra-thin and ultra-light It is highly suitable for portable applications.
- SPI interface: Can be easily connected to a microcontroller.
- Compliant with RoHS standards: Meets environmental protection standards
Typical Applications
- e-readers
- Digital signage
- Electronic shelf labels
- portable gaming devices
- etc
Additional Note
The operating temperature range of EPD-290BWR is from 0 to +40 degrees Celsius. The storage temperature range of EPD-290BWR is from -20 to +60 degrees Celsius. The monitor is sensitive to moisture and ultraviolet rays. It is recommended to store the monitor in a cool, dry and dark place.
Key Selling Points
1. Tri-Color Display (Black/White/Red)
High-contrast three-color rendering for critical information highlighting (e.g., prices, alerts).
2. Fast Refresh Capability
Partial refresh as low as 0.3s (flicker-free) and full refresh in 1.5-3s, enabling dynamic content updates without prolonged delays.
3. Ultra-Low Power Consumption
Zero power when static (bistable technology); only consumes energy during refreshes (~30mW).
4. Sunlight-Readable & Wide Viewing Angle
Reflective display with >170° viewing angle, glare-free in direct sunlight.
5. Durability and Flexibility
Optional flexible substrates for bendable designs (e.g., wearable devices, curved surfaces).
6. Wireless and Battery-Free Options
Supports NFC/UHF wireless updates without batteries (energy harvesting for zero-maintenance tags).
7. Easy Integration
Standard SPI interface with open-source drivers for Raspberry Pi, Arduino, STM32, and ESP8266/32 platforms.
Target Application Scenarios
- Smart Retail & Logistics: Electronic shelf labels (ESL), inventory tags, and warehouse management systems for real-time price/stock updates.
- Industrial Instrumentation: Low-power displays for sensors, meters, and portable diagnostic tools in harsh environments.
- Healthcare & Tracking: Medication labels, patient wristbands, and hospital bed cards with secure, non-volatile information display.
- Smart Consumer Devices: Secondary smartphone screens (e.g., phone cases showing notifications/battery status without draining power).
- Sustainable IoT Solutions: Solar-powered signage, baggage tags, and NFC-enabled smart posters for public spaces.
Key Precautions
- Refresh Mode Management: Partial Refresh Limit: Use ≤10 partial refreshes before a full refresh to prevent ghosting. Full Refresh Time: ~2-3 seconds required for clean transitions.
- Temperature Sensitivity: Operating Range: 0°C to 50°C (performance degrades beyond this). Red Color Lag: Red pigment refreshes slower in cold environments (
- Voltage Requirements: Strictly follow logic voltage (3.3V) and VCOM driver voltage (±15V±0.5V).
- Mechanical Protection: Avoid pressure on the active area (glass substrate vulnerability). No direct cleaning - use dry microfiber cloth only.
- UV Exposure: Prolonged sunlight may fade red pigment; add UV filter for outdoor use.
- ESD Sensitivity: Handle with grounded wrist straps; ESD can permanently damage e-ink film.
Frequently Asked Questions (FAQs)
Q1: How "fast" is partial refresh?
A: Partial refresh takes 0.3-0.5s (flicker-minimized), but requires a full refresh (~2s) every 5-10 updates to clear ghosting.
Q2: Can I drive this with Arduino/Raspberry Pi?
A: Yes, via SPI interface. Use libraries like GxEPD (Arduino) or waveshare-epd (RPi). Ensure your driver board supports tri-color waveforms.
Q3: Why does red update slower than black/white?
A: Red electrophoretic particles have higher inertia. Full refresh is needed for crisp red elements.
Q4: Does it work below 0°C?
A: Not recommended. Below 0°C, refresh time increases significantly (>5s), and red may fail to update.
Q5: How to fix persistent ghosting?
A: Run a 3-step sequence: Full white -> Full black -> Full white refresh. Avoid high-contrast partial updates.
Q6: Can I use wireless (NFC/RF) updates?
A: Only with dedicated ESL controller ICs (e.g., RA8875). Standard SPI displays require wired control.
Q7: Why does red appear muddy after partial refresh?
A: Red requires full-voltage waveforms. Use EPD_FULL mode for red elements or reduce partial refresh frequency.
Q8: Power consumption during refresh?
A: ~25-35mA @3.3V during update (30-50mW), zero in static mode.
Q9: Is touch overlay compatible?
A: Possible but not advised. Overlays reduce clarity and reflectivity. Use IR/frame-based touch instead.
Q10: How to optimize battery life?
A:
- Minimize full refreshes
- Bundle updates (e.g., change all elements at once)
- Use deep sleep on controller IC between updates
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
ESEN HK LIMITED
Location
Unit 901B, 9th Floor, Block D, Cai Fu Gang International Building, Bao Yuan Road, Bao An District, Shenzhen,China
Contact Person
james