Intelligent Vehicle Positioning System 4G Vehicle Tracking Fleet Management GPS
Fleet Management GPS Intelligent Vehicle Positioning System LY-MG12
Product Features
- The LY-MG12 is an enhanced satellite positioning vehicle terminal independently developed and designed by the company.
- It features a metal casing and an external antenna, providing strong signals and precise positioning.
- It integrates positioning technology, communication technology, automotive electronics technology, and information technology.
Key Functions
- Supports blind zone reporting and turning point retransmission.
- Equipped with functions such as entry/exit fence zone alarms, overspeed alarms, and terminal power failure alarms.
- Expandable to monitor vehicle fuel consumption, temperature changes, and door sensor status.
Main function
![]()
Real
time![]()
Car
Historical![]()
Electronic
fence![]()
Blind
spot![]()
Oil
monitoring![]()
Temperature monitoring
![]()
Engine status detection
1. Product Specifications
| No. | Item | Specifications | Remarks |
|---|---|---|---|
| 1 | Operating Voltage | DC 9～36V | |
| 2 | Operating Current | 35～45mA@12V (Sleep mode current: ~25mA@12V) | |
| 3 | Dimensions | L74mm*W55mm*H24mm | |
| 4 | Positioning Method | GPS Positioning | |
| 5 | Positioning Error | <10m (Reference data, positioning error is related to terrain, time, and other factors) | Data from company lab tests |
| 6 | Communication Network | 4G | |
| 7 | Communication Method | TCP/UDP | |
| 8 | Operating Temperature Range | -25℃ ~ +75℃ | |
| 9 | Storage Temperature Range | -40℃ ~ +85℃ | |
| 10 | Product Weight | Approx. 300g | Standard configuration weight |
| 11 | Backup Battery Operating Time | Can operate continuously for 2-3 hours when fully charged | 3.7V 180mAh Lithium Battery |
2. Product Features
| Feature Block | Feature Details | Feature Description |
|---|---|---|
| Vehicle Remote Monitoring | Real-time Location Query | Query real-time vehicle status |
| Scheduled Monitoring | Set monitoring intervals based on customer requirements | |
| Blind Zone Data Upload | Stores up to 300 data points when offline and uploads when signal is restored | |
| Status (Version) Query | Platform can remotely query terminal status (version) information | |
| Mileage Setting | Set initial mileage value | |
| Remote Software Upgrade | Supports remote upgrades via Upgrade Manager | |
| Vehicle Alarm Functions | Antenna Open Circuit Alarm | Alarm is triggered if GPS antenna is not connected |
| Overspeed Alarm | Alarm is triggered when GPS speed exceeds the set limit | |
| Low Voltage Alarm | Alarm is triggered when main power voltage drops below 10V | |
| Main Power Loss Alarm | Alarm is triggered when main power voltage drops below 5V | |
| Other Features | External Device Connection | Equipped with a 232 serial port for connecting external devices |
| Turnpoint Data Upload | Immediately uploads location data when direction change exceeds the set value | |
| Fuel Circuit Detection | Supports platform and SMS control for cutting off and restoring fuel/power | |
| EPO Assisted Positioning | Enhances positioning accuracy with EPO assisted positioning | |
| Low Power Mode | 3D accelerometer detects vehicle vibration. Switches to standby mode after 5 minutes of inactivity, turning off GPS module. Returns to active mode upon vibration. |
3. Installation and Operation
1. Device Installation
(1) Inspect the Device
Check the device's appearance and ensure all accessories are included.
(2) Install SIM Card
Open the device's bottom cover and insert the SIM card into the slot. Avoid excessive force to prevent damage. Do not insert or remove the SIM card while the device is powered on. Ensure the SIM card has internet access.
(3) Terminal Installation Location Requirements
A. Waterproof: Choose a location that is not prone to water ingress to keep the terminal dry. Avoid air conditioning vents to prevent condensation inside the terminal, which can affect its lifespan.
B. Vibration Resistance: Do not install the terminal in areas with prolonged strong vibrations.
C. Interference Prevention: Keep the terminal away from in-car audio and communication devices to avoid conduction and radiation interference.
(4) Install Positioning Antenna
Ensure the positioning antenna's receiving surface faces upward and is not obstructed by metal objects. For optimal performance, the antenna's base should be as flat as possible, with a tilt angle not exceeding 45°.
Route the cables discreetly for both aesthetic reasons and to prevent accidental or intentional damage. Connect the positioning antenna to the terminal's "Positioning Antenna" port on the side and ensure it is tightly secured to avoid loosening due to vibrations, which could affect positioning accuracy.
(5) Install Communication Antenna
To prevent signal interference, avoid entangling the communication antenna with other control cables. To avoid interference with in-car wireless devices (e.g., radio), maintain a distance of at least 50 cm between the communication antenna and other devices.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.