Smart 4G Full Network Vehicle GPS Locator OBD Vehicle Tracker With GPS LBS EPO
Smart 4G Full Network GPS Locator - OBD Vehicle Tracker with GPS + LBS + EPO
Smart 4G locator automatically adapts to the network environment to maintain the best connection state.
Installation via the OBD interface does not affect the vehicle's appearance and original functions.
With the GPS + LBS + EPO positioning system, it realizes intelligent and accurate vehicle tracking and can be linked with a mobile APP, allowing users to view vehicle information anytime and anywhere.
Product Advantages
- During sudden acceleration, sudden deceleration, sharp turns, or collisions, the device reports alarm events.
- The product is small and easy to conceal, with accurate positioning, improving user driving safety.
- It quickly analyzes and processes raw driving data, making vehicle operations easier and more reliable.
Main function
![]()
Real time
positioning![]()
Historical
trajectory![]()
Electronic
fence![]()
Overspeed
alarm![]()
Power outage
alarm
Product Specifications
| No. | Item | Specifications | Remarks |
|---|---|---|---|
| 1 | Operating Voltage | DC9V-36V | |
| 2 | Operating Current | 29mA@12V (Standby Current 4mA) | When not charging |
| 3 | Dimensions | L45mm*W39mm*H22mm | |
| 4 | Positioning Method | GPS+BD | |
| 5 | Positioning Error | <10m | Data from company lab tests |
| 6 | Communication Network | 4G | Frequency Bands: B1/B3/B5/B8/B3/B38/B39/B40/B41 |
| 7 | Communication Method | TCP | |
| 8 | Operating Temperature Range | -25℃~ +75℃ | |
| 9 | Storage Temperature Range | -40℃ ~ +85℃ | |
| 10 | Backup Battery Operating Time | 0.5 hours | 55mAh |
Product Features
| Feature Block | Feature Details | Feature Description |
|---|---|---|
| Vehicle Status Detection | Scheduled Tracking | Uploads location data at set intervals. |
| Ignition/Shutdown Status | Each data packet includes ACC ON/OFF status. | |
| Power Loss Alert | Alerts when vehicle voltage drops below 5V or power cable is disconnected. | |
| Low Voltage Alert | Alerts when vehicle voltage drops below 9V. | |
| Overspeed Alert | Alerts when GPS speed exceeds the set limit. | |
| Other Features | Blind Zone Data Upload | Stores up to 300 data points when offline and uploads when signal is restored. |
| Assisted Positioning | Enhances positioning accuracy with assisted positioning. | |
| Turnpoint Data Upload | Uploads location data immediately when direction changes significantly, optimizing trajectory. | |
| Remote Upgrade | Supports remote upgrades via Upgrade Manager. | |
| Standby Mode | 3D accelerometer detects vehicle vibration. Switches to standby mode after 5 minutes of inactivity, turning off GPS module. Returns to active mode upon vibration. |
Installation and Operation
1. Device Installation
Inspect the Device
Check the device's appearance and ensure all accessories are included.
2. Install SIM Card
Open the device and insert the SIM card into the slot. Avoid excessive force to prevent damage. Do not insert or remove the SIM card while the device is powered on. Ensure the SIM card has internet access.
3. Terminal Installation Location Requirements
A. Waterproof: Choose a location that is not prone to water ingress to keep the terminal dry. Avoid air conditioning vents to prevent condensation inside the terminal, which can affect its lifespan.
B. Vibration Resistance: Do not install the terminal in areas with prolonged strong vibrations.
C. Interference Prevention: Keep the terminal away from in-car audio and communication devices to avoid conduction and radiation interference.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.