ALPHA1 L 15-40 130

Grundfos ALPHA1 L 15-40 130 is a high-efficiency circulator pump with permanent-magnet motor (ECM technology).

The pump features three control modes; radiator heating mode, underfloor heating mode and constant curve/constant speed.

Furthermore, the speed can be controlled by a low-voltage PWM (Pulse Width Modulation) signal.

The pump has a ceramic shaft and radial bearings, carbon thrust bearing, stainless-steel rotor can, bearing plate and rotor cladding, composite impeller, all of which contribute to long life, and the pump is self-venting, which contributes to easy commissioning as well as simple selection of control mode.

The compact design featuring pump head with integrated control box and control panel fits into most common installations as well as boilers.

The pump and motor form an integral unit without shaft seal. The pump is of the wet-runner design. This means the bearings are lubricated by the pumped liquid. These constructions ensure maintenance-free operation.

The pump housing is made of cast iron and is electrocoated to improve the corrosion resistance.

The motor is a synchronous permanent-magnet rotor/compact-stator motor. The pump controller is incorporated in the control box, which is fitted to the stator housing and connected to the stator via a terminal plug. Features ALPHA1 L

Circulating pump ALPHA1 L 15 - 40 130 Item number 99160550 Suitable for Commercial heating Domestic heating circulation Heat supply ALPHA1 L is a high - efficiency circulating pump for heat supply systems. This pump can be used independently or integrated into existing systems as a replacement or for new heat supply systems.

• Liquid conveyed: Water
• Liquid temperature range: 2..95 °C
• Liquid temperature during operation: 60 °C
• Density: 983.2 kg/m³

• Rated flow rate: 1.5 m³/h
• Rated head: 2.01 m
• TF rating: 95
• Approvals: VDE, CE, EAC, SEPRO

• Pump casing: Cast iron
• Pump housing: EN 1561 EN - GJL - 150, ASTM A48 - 150B
• Impeller: Composite (PES + 30% GF)

• Ambient temperature range: 0..55 °C
• Maximum operating pressure: 10 bar
• Interface type: G
• Size of connection: 1 inch
• Pressure rating for pipe connection: PN 10
• Port - to - port length: 130 mm

• Minimum power input - P1: 4 W
• Power input P1: 25 W
• Power supply frequency: 50 / 60 Hz
• Rated voltage: 1 x 230 V
• Maximum current: 0.05..0.26 A
• Encapsulation class (IEC 34 - 5): X4D
• Insulation class (IEC 85): F
• Self - protection standard: NONE

• Energy (EEI): 0.20
• Terminal box position: 6H
• Net weight: 1.8 kg
• Gross weight: 1.93 kg
• Transport volume: 0.004 m³
• Place of origin: DK
• Tariff number: 84137099.90