Grundfos MAGNA1 100-120 F Grundfos Heating Pump For Commercial Heating And Air Conditioning Needs
Grundfos MAGNA1 100-120 F
The Grundfos MAGNA1 circulator pump is the simple option for a job well done. With its high energy efficiency the product lives up to the EuP 2015 regulations ensuring substantial savings on electricity, and with its intuitive, user-friendly interface and maintenance-free design, MAGNA1 is the ideal circulator pump for basic performance needs in applications where basic system control and monitoring are desired. With this range of circulator pumps, everything from setup to basic control and monitoring are made easy. The pump is maintenance-free due to the canned-rotor type design. MAGNA1 offers the possibility of monitoring the pump via the fault relay output. The digital start/stop input remotely controls the pump. The pump communicates wirelessly with the Grundfos GO Remote app. MAGNA1 can work as main pump in both heating and cooling applications, including:
Mixing loops
Heating surfaces
Air-conditioning surfaces
Ground-source heat pump systems
Smaller chiller applications.
MAGNA1 is a single-phase pump and characterised by having the controller and operating panel integrated in the control box. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled.
The pump incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.
|
 |
- Maximum head: 120 decimeters
- TF rating: 110
- Approvals: CE, VDE, EAC, MOROCCO, UKCA, TSE, RCM, Ukr...
- Cavity model: C
- Pump casing: Cast iron
- Pump housing: EN 1561 EN - GJL - 250
- Pump casing: ASTM A48 - 250B
- Impeller: Composite
- Ambient temperature range: 0..40 °C
- Maximum operating pressure: 10 bar
- Interface type: DIN
- Size of connection: DN 100
- Pressure rating for pipe connection: PN 10
- Port - to - port length: 450 mm
- Liquid conveyed: Water
- Liquid temperature range: -10..110 °C
- Liquid temperature during operation: 60 °C
- Density: 983.2 kg/m³
- Maximum input power - P1: 1523 W
- P1 min.: 31.11 W
- Power supply frequency: 50 / 60 Hz
- Rated voltage: 1 x 230 V
- Minimum current consumption: 0.32 A
- Maximum current consumption: 6.73 A
- Maximum speed: 3642 revolutions per minute
- Encapsulation class (IEC 34 - 5): X4D
- Insulation class (IEC 85): F
- Energy (EEI): 0.20
- Net weight: 34.1 kg
- Gross weight: 37.8 kg
- Transport volume: 0.097 m³
- Finnish LVI No.: 4615229
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.