40ft ISO Gas Tank Container 52.5 CBM UN T50 for Compressed Liquefied LPG Chlorine Ammonia High Capacity ISO Container
Low Cost
Convenient and fast
Safety and Eco-Friendly
Specifications - 40' iso tank container | ||||
Frame Dimensions (L x W x H) | 12192 x 2438 x 2591 mm | |||
Nominal Capacity | 52500 litres (approx) | |||
Maximum Gross Mass | 36000 kgs | |||
Tare Mass (Nominal) | 12,000 kgs (with baffles) (+/- 3% tolerance) | |||
Design Temperature (Frame & Tank) | -40 to + 55 °C | |||
Pressure | Working pressure | 18 bar | ||
Test pressure | 25.7 bar | |||
Material | Tank | Shell & Heads: SA612N; Flanges: SA350LF2 | ||
Headframes | Q345D or equivalent | |||
- One (1) manhole at rear end of the container - DN500 inside diameter, with bolted cover - Spiral wound gasket (PTFE/304) | ||||
- One (1) flange for safety relief valve on top of tank (approx 18 offset from vertical centreline. - Size DN80, equipped with Fort Vale relief valve (FV 015/22615F), Fort Vale Bursting Disc, manometer (FV920/20TTBBSPDRY), and custom seals. - Gasket PTFE. | ||||
Liquid Line | - One (1) flange 2" (DN50) for internal bottom valve and external, a manual operated Fort Vale 2" ball valve (FV 802B/0010L) - Internally a dip pipe to the bottom of the tank, with sump in tank-wall - Gasket PTFE/304. - Ball valve provided with blind flange and 3¼" ACME coupling with cap - One (1) purge cock on the ACME coupling. | |||
Gas Line | - One (1) flange 2" (DN50) for internal bottom valve and external, a manual operated Fort Vale 2" ball valve (FV 802B/0010R) - Internally a stand pipe to the gas phase - Gasket PTFE/304. - Ball valve provided with blind flange and 1¾" ACME coupling with cap - One (1) purge cock on the ACME coupling. | |||
Manometer | - One (1) ½" connection for pressure gauge, connected to the gas phase of the tank. - External a DN15 ball valve and a ¼' manometer 0-40 Bar (FV 920/40RBSP) | |||
Thermometer | - One (1) ½" connection for pressure gauge - Thermometer range -40 to +100 °C and -40 to +212 ºF, dual scale | |||
Design Code | ASME VIII Div. 2 with ASME U2-Stamp | |||
Design Approval | Lloyds Register or BUREAU | |||
5.1. Are your 40' iso tank container for sale brand new?
Yes, all the container we provided are brand new. In fact, we will produce new container after order confirmation.
5.2 Does your 40' iso tank container meet with international requirement?
All of our tank container will be approval by BV or LR or CCS and meet with below requirement.
ISO 1496/3
UN Transport of Dangerous Goods
UIC International Rail Approval
TIR International Transport Goods under Custom Seal
CSC International Convention for Safe Containers
DOT US Code Federal Regulations CFR49
DOT UK Carriage of Dangerous Goods
CTC Canadian Transport Commission (Rail)
AAR American Association of Railroads
FRA Federal Rail Association USA
BAM G.D.R Domestic Approval
ISO/TC11
5.3 Can you provide Drawings for confirmation?
Yes, we will provide drawing after order confirmed before production
5.4 Do you provide OEM Service?
Yes, we have a first-class team and could design as per your requirement.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.