8800p Al2O3 Trace Teledyne Analytical Instruments Gas Moisture Analyzer

Price Negotiable

Price: negotiable

MOQ: 1PC

Delivery Time: on request

Brand: Teledyne

Product Description

8800p Al2O3 Trace Teledyne Analytical Instruments Gas Moisture Analyzer

Product Description

Teledyne Trace Moisture Analyzer 8800P

Part Number: 8800P

Product Name: Trace Moisture Analyzer

Origin: USA

Manufacturer: Teledyne

Specification

The 8800 Series Single Point Trace Moisture Analyzers are provided in four compact, reliable designs with the ability to detect moisture from -148°F (-100°C) to ambient dew point levels of +68°F (+20°C) on either a continuous or spot checking basis.

8800A - Flush Mount DIN enclosure with connections made via a pluggable screw terminal block
8800B - Wall Mount N4X (IP65) enclosure with connections made with 3 bottom watertight fittings
8800P - Portable battery operated design in the Standard, I/O and I/S versions (I/S is suitable for hazardous areas)
8800T - Low-cost, loop powered 4-20 mA transmitter design with built-in LCD display

Features

Readout available in (5) engineering units; °C, °F, ppm, lbs. H2O/mm scf & g H2O/m3
Scalable signal outputs (0-20 mADC & 4-20 mADC)
Built-in LCD with backlight, 3.5 digits and custom legends for units / mode
Din box enclosure: (cut-out dimensions of 137 mm W x 67 mm H)
(4) front panel membrane tactile push button controls, all settings stored in EEPROM
(2) programmable alarm relays w/programmable variable hysteresis rated 10A @ 240V
Power requirements of 100-240 VAC, 50 or 60 Hz
Operating temperature of electronics: -10 to 50° C
Class I & II, Division 1, Groups A, B, C, D, E, F & G (when used with optional safety barriers)
High capacitance aluminum oxide (Al2O3) sensor using Hyper Thin Film (HTF)™ Technology
(2) meters of sensor interconnection cable included
Power cord
Instruction manual (one copy per analyzer ordered)

Oxygen Sensor Specifications

Model	Part Number	Description	Application
A-2C	C6689-A2C	Used for trace O2 measurements in CO2 containing backgrounds (0.1-100% CO2). CO2 must be present.	Use where acid gases are present (CO2, HCl, HCN, etc). CO2 must be present.
A-2CXL	B74033-A2CXL	Specially qualified A2C sensor to operate in XL model analyzers. Low range limit is 0-1 ppm.	Use where acid gases are present (CO2, HCl, HCN, etc). CO2 must be present.
A-5	C6689-A5	Intermittent or continuous monitoring of percent O2 in gas mixtures containing 0-100% CO2. 90% response is time is 45 seconds.	Has more tolerance to exposure to air than A-3. No restrictions on CO2 concentration.
B-1	C6689-B1	General purpose percent oxygen analysis where fast response is desired (90% in less than 7 seconds).	Use B-3 or C-3 where longer life is required and response time is relatively unimportant. May be used to spot check flue gas.
B-2C	C6689-B2C	General purpose trace O2 analysis for use in inert gas and hydrocarbon streams. Low range limit is 0-10 ppm.	May be used in CO2 free gas streams containing highly mobile gases such as H2, He and ethylene.
INSTA TRACE	B71875	Special patented construction provides rapid recovery, during initial cell installation, to low PPM levels by reducing the recovery period from several hours to just minutes. Low range limit is 0-10 ppm.	Used for trace O2 analysis in inert gas and hydrocarbon streams.