E+H Flowmeter 92F25-DSKA1AA0A4AW Proline Prosonic Flow 92F In-line Ultrasonic Flowmeter
Price:
USD3600
MOQ:
1
Delivery Time:
4-8weeks
Brand:
E+H
Product Description
E+H Flowmeter 92F25-DSKA1AA0A4AW
Detailed Parameters, Functions & Application Scenario Analysis
1. Model Code Interpretation: 92F25-DSKA1AA0A4AW
Series: Proline Prosonic Flow 92F In-line Ultrasonic Flowmeter, 2-wire loop-powered type
Nominal Diameter: DN25 (1 inch)
Code definition:
- D: 3-beam measurement design with strong anti-interference performance and short straight pipe requirement
- S: Wetted part material: CF3M (316Ti stainless steel)
- K: Process connection: PN40 pressure rating, 316L flange connection
- A: Standard factory calibration
- 1: Basic certification
- A: Integrated aluminum housing, IP67 protection grade
- 0: No separate signal cable equipped
- A: M20 cable gland entry
- 4: Dual-line backlit LCD display with local operation keys, built-in HART protocol
- A: Factory default configuration, basic software version
- W: Output signals: 4-20mA HART + pulse/status output
2. Core Technical Parameters (DN25)
Measurement Performance
- Measuring principle: Time-difference ultrasonic technology, full bore design
- Flow velocity range: 0.5 ~ 10 m/s
- Volumetric flow range (DN25): 0 ~ 17.7 m³/h
- Basic accuracy: ±0.5% of reading; optional high precision ±0.3% of reading (velocity＞0.5 m/s)
- Repeatability: ±0.2% of reading
Process Operating Conditions
- Medium temperature range: -40℃ ~ +150℃ (extended version up to 200℃ available)
- Rated working pressure: PN40 (40 bar), compatible with ASME Class300
- Wetted material: 316L / CF3M stainless steel
- Explosion-proof certification: ATEX, IECEx, FM, CSA, NEPSI (China Ex certification)
- Protection class: IP67 / NEMA 4X
Electrical & Communication Specifications
- Power supply: 2-wire loop-powered via 4-20mA loop, no independent external power required
- Signal output: 4-20mA analog, pulse output, status switch output
- Communication protocol: HART; expandable to PROFIBUS PA / FOUNDATION Fieldbus
- Human-machine interface: Dual-line backlit LCD display, on-site key configuration
3. Main Functions
- Compatible with both conductive and non-conductive liquids, applicable for oil products, organic solvents and low-conductivity media which electromagnetic flowmeters cannot measure
- 3-beam sensing structure, only 3D upstream straight pipe required, ideal for limited installation space
- Full straight-through bore structure with zero pressure loss, energy-saving operation, free from clogging risk, suitable for media with tiny solid particles and fibers
- Built-in intelligent diagnostic function: air bubble detection, scaling & corrosion monitoring, sensor self-verification and automatic data backup
- Simplified wiring design with 2-wire system, support remote parameter configuration and data monitoring via HART communication
4. Typical Application Scenarios
Chemical & Petrochemical Industry (Most Recommended)
Organic solvents such as methanol, ethanol, and aromatic hydrocarbons; hydrocarbon oil products including gasoline, diesel oil and crude oil; high-purity water, deionized water, boiler feed water, ethylene glycol and dilute acid-base solution.
Oil & Gas and Power Industry
Oilfield water injection, finished oil pipeline transportation; power plant circulating water, condensed water and chemical dosing system; hydraulic oil and lubricating oil flow measurement.
Pharmaceutical & Fine Chemical Industry
WFI water for injection, pure steam condensate, solvent recovery process and batching control of reactor raw materials.
Water Treatment & General Utilities
Industrial softened water, boiler make-up water, cooling tower circulating water, low-solids wastewater, central air-conditioning chilled water and heating hot water.
Not Recommended Application Conditions
Media with high solid content and severe abrasion such as slurry and mud; highly corrosive strong acid & alkali liquid; gas and steam medium (this model is exclusively for liquid measurement).
5. Comparative Selection Advantages
- vs Electromagnetic Flowmeter: Supports non-conductive liquid measurement, wider temperature resistance and zero pressure loss
- vs Coriolis Mass Flowmeter: More cost-effective, simple 2-wire wiring, easy on-site installation
- vs Clamp-on Ultrasonic Flowmeter: Higher measuring accuracy and better long-term operational stability
6. Summary
Model 92F25-DSKA1AA0A4AW is a DN25 3-beam in-line ultrasonic flowmeter featuring 2-wire HART communication, 150℃ medium temperature resistance and PN40 high pressure resistance. It is the preferred flow measuring instrument for non-conductive liquid, high-purity fluid and oil medium in chemical and petrochemical industries, integrating high precision, zero pressure loss, economical cost and convenient installation.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
GREAT SYSTEM INDUSTRY CO. LTD
Location
Flat 10, 6/F, Block A, Hi-Tech Ind. Ctr. 5-21 Pak Tin Par St, Tsuen Wan, HK
Contact Person
Jim