Spray-Paint Alloy Steel High Air Pressure DTH Hammer for Rock Drilling Compatible with DTH Bit SD4 SD5 SD6 SD8 SD10 SD12
Price:
Negotiable
MOQ:
1
Delivery Time:
Negotiable
Brand:
Super Diamond
Product Description
SD series High Air Pressure DTH Hammer compatible with bit shank SD4 / SD5 / SD6 / SD8 / SD10 / SD12
Our Advantages:
1. Customized acceptable
2. Raw material is very high quality alloy metal and steel, we focus on quality and care clients' concern.
3. Harden treatments
4. High quality with good price.
Technical Information:
1. Valve air distribution. More reliable.
2.Simple design of the piston, long life.
3.More efficient energy transfer, faster drilling speed, lower air consumption and lower oil consumption.
4.Fewer internal parts, simple structure, longer life,less failure and easier to maintain because all the parts are heat treated.
5.Easy to disassemble because the top sub, the drive chuck and the external cylinder are connected by multi-sted thread.
The advantages of hammers without foot valve against with foot valve:
1. No more worries on the foot valve breakage or distortion or expansion due to the abrasion or high tempreture.
2. Higher impact rate, lower energy consumption, around 15-30% higher drill speed than the one with foot valve
3. Remain simple design, and reliable parts, long life, easy and cheap maintenance.
4. Lower air and oil consumption, oil consumption can be around 10% lower than the one with foot valve.
5. Strongly recommond.
Products specifications:
Models: SD4, SD5, SD6, SD8, SD10, SD12, SD15
| SD4 | SD5 | SD6 | SD8 | SD10 | SD12 | |
| Length(less bit) | 1084mm | 1175mm | 1261mm | 1463mm | 1502mm | 1880mm |
| Weight (less bit) | 40.5kg | 72.5kg | 100.0kg | 192.0kg | 290.0kg | 487.0kg |
| External diameter | 99mm | 125mm | 142mm | 180mm | 225mm | 275mm |
| Bits shank | SD4 | SD5 | SD6 | SD8 | SD10 | SD12 |
| Bits diameter | 105-135mm 4 1/8" - 5 1/8" | 130-156mm 5 1/8" - 6 1/8" | 152-203mm 6" - 8" | 200-279mm 7 7/8" - 11" | 254-330mm 10" - 13" | 305-381mm 12" - 15" |
| Connection thread | API 2 3/8" Reg | API 3 1/2" Reg | API 3 1/2" Reg | API 4 1/2" Reg | API 4 1/2" Reg API 5 1/2" Reg | API 6 5/8" Reg |
| Air pressure | 1.0-2.5 Map | 1.0-25.Mpa | 1.0-2.5Mpa | 1.0-2.5Mpa | 1.0-2.5Mpa | 1.0-2.5Mpa |
Other shank can be available:
3.5" hammer, shank: DHD3.5 / Bulroc BR3 / M30 /Mach303
4" hammer, IR DHD340A / SD4 / COP44 / QL40 / Bulroc BR4 / M40 / Mach44 shank
5" hammer, IR DHD350R / SD5 / COP54 / Bulroc BR5 / QL50 / M50 /Mach50 shank
6" hammer, IR DHD360 / SD6 / COP64 / Bulroc BR6 / QL60 / M60 shank
8" hammer, IR DHD380 / SD8 / COP84 /QL80 shank
10" hammer, SD10 / Numa100 shank
12" hammer, IR DHD1120 / SD12 / Numa120 / Numa125 shank
Hammers | Bit Shank | Connection Thread | Suitable bit | Working pressure | Air consumption | |
| 1-3" Middle-low pressure DTH hammers | BR1 BR2 BR3 | RD40 box RD50 box API 2 3/8" Reg | ¢64-¢76mm ¢70-¢90mm ¢90-¢110mm | 0.7-1.75Mpa 0.7-1.75Mpa 0.7-1.75Mpa | 0.7Mpa | 4.5m3/min |
| 1.0Mpa | 4m3/min | |||||
| 1.4Mpa | 5m3/min | |||||
| 3" DTH hammers | DHD3.5 COP32/COP34 M30 | API 2 3/8"Reg | ¢90-¢110mm | 1.0-1.5Mpa | 1.0Mpa | 4.5m3/min |
| 1.5Mpa | 9m3/min | |||||
| 4" DTH hammers | DHD340 COP44 QL40 SD4 M40 | API 2 3/8"Reg | ¢105-¢130mm | 1.0-2.5Mpa | 1.0Mpa | 6m3/min |
| 1.8Mpa | 10m3/min | |||||
| 2.4Mpa | 15m3/min | |||||
| 5" DTH hammers | DHD350 COP54 QL50 SD5 M50 | API 2 3/8"Reg/API 3 1/2"Reg | ¢130-¢156mm | 1.0-2.5Mpa | 1.0Mpa | 9m3/min |
| 1.8Mpa | 15m3/min | |||||
| 2.4Mpa | 23m3/min | |||||
| 6" DTH hammers | DHD360 COP64 QL60 SD6 M60 | API 3 1/2"Reg | ¢152-¢203mm | 1.0-2.5Mpa | 1.0Mpa | 10m3/min |
| 1.8Mpa | 20m3/min | |||||
| 2.4Mpa | 28.5m3/min | |||||
| 8" DTH hammers | DHD380 COP84 QL80 SD8 | API 4 1/2"Reg | ¢200-¢279mm | 1.0-2.5Mpa | 1.0Mpa | 15m3/min |
| 1.8Mpa | 26m3/min | |||||
| 2.4Mpa | 34m3/min | |||||
| 10" DTH hammers | SD10 NUMA100 | API 6 5/8"Reg | ¢254-¢330mm | 1.0-2.5Mpa | 1.0Mpa | 22m3/min |
| 1.8Mpa | 40m3/min | |||||
| 2.4Mpa | 55m3/min | |||||
| 12" DTH hammers | DHD1120 SD12 NUMA120 NUMA125 | API 6 5/8"Reg | ¢305-¢381mm | 1.0-2.5Mpa | 1.0Mpa | 30m3/min |
| 1.8Mpa | 56m3/min | |||||
| 2.4Mpa | 78m3/min | |||||
Production Corners:
Package:
Carton box with foam, then into the ply-wooden cases and or pallet for protecting the products and avoid the damagement during transportation.
Customized package acceptable.
Quality Warranty:
Our products are made of high quality steel and all spares parts are inspected strictly before shipping. We have quickly responses for your complaint and suggestion.
Production Lead-time:
Generally need 15-30 days.
Transportation:
By air, By Express or By sea according to your requests.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Changsha Chaojingang Machinery Manufacturing Co., Ltd.
Location
No. 8, Fengyu North Road, Yongan Town, Liuyang, Changsha
Contact Person
Jacky ( Sales Manager)