UL 9540A Certified Explosion Containment Chamber 500×500×500mm for Battery Safety Testing
Price:
negotiate
MOQ:
1 set
Delivery Time:
7-15 work days
Brand:
Neide
Product Description
Dual-Wall Explosion Containment Chamber
UL 9540A certified explosion containment chamber designed for safe battery testing operations. This customizable enclosure provides maximum protection during overcharge and over-discharge testing procedures.
Product Overview
Safely conducts overcharge/over-discharge testing by isolating batteries within a sealed explosion-proof enclosure while connected to external testing equipment. Protects operators and instruments from thermal runaway hazards during battery failure scenarios.
Key Features
- Explosion Protection: 10mm reinforced steel walls (ASME Section VIII compliant) with pressure-relief venting that directs blast upward
- Customizable Design: Chamber dimensions and configurations tailored to specific cell/pack sizes with multi-port interfaces for test leads and thermal probes
- Compliance Ready: Pre-installed mounting racks for UL 1642, IEC 62133, and UN 38.3 tests with flame arrestors on all cable ports (ATEX Category 1 certified)
Technical Specifications
| Parameter | Specification |
|---|---|
| Model Name | Dual-Wall Explosion Containment Chamber |
| Internal Dimensions | 500×500×500mm (L×W×H) ※ Customizable upon request |
| External Dimensions | Approx. 700×600×1660mm (L×W×H) |
| Control Panel | Top-mounted HMI interface |
| Door System | Single right-to-left opening door with stainless steel inner door and silicone compression seal |
| Internal Material | 1.0mm mirror-finished stainless steel |
| External Material | 1.0mm cold-rolled steel with powder coating |
| Insulation System | Marble base insulation plate with PTFE-lined walls (flame-retardant/chemical-resistant) |
| Test Ports | Two Ø50mm ports (upper/lower chambers) |
| Door Lock | Heavy-duty hinges + blast-proof latch system |
| Mobility | Four lockable casters with brakes |
| Lighting | On-demand LED illumination |
| Smoke Extraction | Dual Ø90mm rear vents with ducted exhaust and manual blower control |
| Pressure Relief | 150×150mm ASME-certified vent + door restraint chains (prevents detachment) |
| Electrical Safety | Ground protection + fast-acting fuses |
| Power Supply | AC 220V/50Hz, 5A, 1.0kW |
| Weight | Approx. 120kg |
| Optional Features | Fire suppression system • Video monitoring • Electronic locking |
Company Information
Brand: Neide | Factory: Yes | Material: SUS304 or customized | After-sales service: Yes
Related Products
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Dongguan Neide Technology Co., Ltd
Location
No. 13, Shihuan Road, Dongcheng Sub-district, Dongguan City, Guangdong Province
Contact Person
Coco