1100°C Mbf40-11n Atmosphere Box Furnace Melting Furnace 330mm × 200mm × 660mm for Ceramic Sintering Heating

The industrial kiln is primarily utilized for the sintering processes of lithium battery cathode and anode materials, and is also applicable to the sintering of magnetic materials, electronic components, electronic ceramics, and related products.

• Rated Temp: 200-1100°C
• Max Temp: 1150°C
• Effective Dimensions: 330 × 200 × 660mm (W×H×D)
• Heating Method: Ceramic tube-encased silicon carbide rod
• Process Atmosphere: Air or Nitrogen
• Temperature Control Stability: ±1°C with PID parameter auto-tuning
• Temperature Uniformity: Better than ±5°C
• Thermocouple: Type N
• Temperature Control Points: Upper and lower points with single measurement point in middle
• Process Steps: 9 steps
• Oxygen Content Detection: Micro-oxygen analyzer for real-time monitoring
• Exhaust: Top-mounted chimney with manual exhaust volume adjustment
• Alarm System: Sound and light alarms for over temperature, thermocouple failure
• Max Heating Power: ≤25kW
• Surface Temperature Rise: ≤40°C
• Furnace Dimensions: 1150×1970×1460mm (W×H×D)
• Appearance Color: Light gray

1. Furnace frame
2. Chimney
3. Furnace chamber
4. Furnace door
5. Heating element
6. Sagger (ceramic container used in kilns)
7. Roller bar (for moving ceramics during firing)

• Environmental conditions: Temperature 0-40°C, humidity ≤80% RH, no corrosive gas, no strong airflow disturbance
• Process air conditions: 99.999% purity nitrogen, pressure 0.2-0.4Mpa, gas consumption 4-12m³/h
• Ventilation system: Non-contact access to user pumping system, capacity >15m³/h
• Power conditions: Capacity >35kVA, 3 phases 5 lines, voltage 220/380V, frequency 50Hz
• Installation site: 2500mm×2000mm×3000mm (W×H×D), area >5m²