-Made Electric Heat Treatment Furnace Hwf160-10nh Vacuum Furnace with Effective Chamber Dimensions 500*500*650mm
| Model NO. | HWF160-10NH |
|---|---|
| Type | Electric Holding Furnace |
| Specification | 1650×1950×2000mm (W×H×D) |
| Supply Ability | 50 Sets/Year |
| Payment | Support payments in USD |
| Refund Policy | Claim a refund if your order doesn't ship, is missing, or arrives with product issues |
This industrial furnace is specifically engineered for metal component soldering and HTCC package processing, while also supporting additional thermal treatments including decarburization, annealing, quenching, scorching, hardening, and thermal decomposition operations.
- Rated Temperature: 900°C
- Maximum Temperature: 1100°C
- Atmosphere: N2, H2 with humidification
- Oxygen Content: Measured by O2 content analyzer
- Muffle Material: SUS 310S
- Muffle Dimensions: φ750mm×900mm (d×D)
- Effective Chamber Dimensions: 500×500×650mm (W×H×D)
- Loading Method: Manual, through horizontal guideway shelves
- Heating Method: Resistance wire pre-built heating plate
- Cooling Method: Air cooling with blower
- Temperature Control Stability: ±1°C (controller with P.I.D function)
- Profile Steps: Default 20 steps
- Temperature Uniformity: ±5°C
- Thermocouple: Type K
- Temperature Control: 3 Points
- Temperature Measurement: 1 Point
- Maximum Heating Power: 40kW
- Typical Insulation Power: ≤25kW
- Heating Speed: ≤5°C/min
- Furnace Surface Temperature: ≤40°C
- Maximum Vacuum Value: ≤10Pa
- Exhaust System: 1 exhaust port on top with H2 igniter
- Alarm System: Audible and visual alarms for over temperature, thermocouple failure, low air/water pressure, substandard vacuum level
- Weight: 1500kg
- Appearance Color: Light Grey
- External Dimensions: 1650×1950×2000mm (W×H×D)
- Environmental Conditions: 0-40°C, humidity ≤80%RH, no corrosive gas, no strong airflow disturbance
- N2 Conditions: 99.999% purity, working pressure: 0.2-0.4MPa, Max gas consumption 2-6 m³/h
- H2 Conditions: Working pressure: 0.2-0.4MPa, Max gas consumption 1-3m³/h
- Compressed Air: Dry, clean, oil-free, working pressure: 0.4-0.8MPa
- Water Conditions: Clean, no corrosive water, working pressure 0.1-0.3MPa, 3-9L/min
- Ventilation System: Non-contact access to user pumping system, capacity >15m³/h
- Ground Requirements: Horizontal, no vibration, load-bearing >500 kg/m²
- Power Condition: Capacity >55kVA, 3-phase 5-line, voltage 220/380V, frequency 50Hz
- Installation Site: 3000×2500×3000mm (D×W×H), area >7.5m²
An advanced equipment supplier specializing in the research, development, design, manufacturing, sales, maintenance, and service of high-, medium-, and low-temperature industrial furnaces and laboratory furnaces. Our product range includes bell furnaces, box furnaces, hot air furnaces, vacuum furnaces, tube furnaces, mesh belt furnaces, bogie hearth furnaces, rotary furnaces, roller hearth furnaces, and pusher furnaces.
These furnaces are extensively applied in advanced ceramics, electronic components, thick-film circuits, additive manufacturing, powder metallurgy, new energy, and photovoltaics. Suitable for thermal treatment processes of materials including ITO targets, MLCC/HTCC/LTCC, ceramic filters, magnetic materials, CIM/MIM, lithium battery cathodes and anodes, and various other new material processes such as pre-sintering, dewaxing, degreasing, sintering, drying, heat treatment, curing, and ceramization.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.