Fully Enclosed Industrial Control All-in-one Computer 18.5-inch Embedded Industrial Display Touch Front USB
Embedded Industrial Display
The Embedded Industrial Display, with its high compatibility and industrial-grade stability, serves as a core interactive terminal in industrial automation, medical equipment, smart retail, and other fields. Through deep optimization of hardware and software, it elevates touch accuracy and multi-scenario adaptability to new heights.
![]()
Industrial-Grade Protection and Precision Touch Performance
Featuring a seamless flat glass panel and a fully sealed aluminum alloy body with joint tolerances ≤0.05mm, the IP65 protection rating withstands high-pressure water jet cleaning and dust intrusion.
Ten-point capacitive touch technology supports ±0.03mm positioning accuracy and 3ms response speed. The surface is coated with an AF anti-fingerprint layer, offering a touch lifespan of over 50 million cycles, making it suitable for high-frequency operation scenarios such as clean rooms and surgical sterilization stations.
![]()
High-Definition Display and Multi-System Compatibility
The 19-inch LED industrial A-grade screen provides 350 cd/m² brightness and 16.7M color display, with sRGB 98% color gamut coverage, ensuring clear presentation of production line data, medical images, and other details even under strong light.
It supports Windows XP/7/10 and Linux systems, seamlessly compatible with industrial software such as KingView, WinCC, and ForceControl, meeting data visualization needs in scenarios like petrochemical DCS systems and smart grid monitoring.
![]()
Intelligent Expansion and Industry Customization
The fanless design dissipates heat through an aluminum alloy backplate and copper heat pipe layer, reducing core component temperature by 25% compared to traditional solutions. It supports wide-temperature operation from -20°C to 60°C (upgradable to -30°C~75°C).
Optional electromagnetic stylus module (with 4096 levels of pressure sensitivity) enables electronic signatures and drawing annotations, applicable in scenarios such as bank ATMs and government self-service terminals. Expansion interfaces include 4× USB 3.0, dual Gigabit Ethernet ports, and customizable RS485/CAN bus modules.
| LCD Panel Parameters |
Screen Size |
18.5 Inch |
| Display Area |
409.8 mm.(Height) X 230.4(Width)mm. |
| Aspect Ratio |
16 : 9 |
| LCD Type |
a-Si TFT-LCD Monitor |
| Maximum Resolution |
1920 X 1080 |
| Display Color |
16.7m , 72% NTSC |
| Brightness |
250cd/m² |
| Contrast Ratio |
1200 : 1 |
| Viewing Angle (Up/Down/Left/Right) |
89°/89°/89°/89° (Type)(CR≥10) |
| Response Time |
14ms |
| LCD Panel Lifespan (Hours) |
60,000(Hour.) |
| Field Frequency |
60Hertz |
| PCAP Touchscreen Panel Parameters |
Touch Pattern |
Projected Capacitive Touchscreen Monitor |
| Touch Points |
10 Points |
| Cover Glass |
Morse Glass Size 7 Physically reinforced to prevent explosion |
| Glass 3 mm. Optical mount to reduce parallax |
| Glass Transmission |
>85% (Higher light transmission depends on glass coating technology For example AR/AG) >85% |
| Response Speed |
< 6ms |
| Touch Accuracy |
More than 90% of the touch area ±2 mm |
| Touch Method |
Inch Stylus |
| Output Format |
Coordinate Output |
| Click Time |
Unlimited |
| Smallest Touch Size |
5 mm |
| Long-lasting Durability |
Yes, Available |
| Touch Interface |
USB |
| Operating Temperature and Humidity |
Below 10℃ ~ +50℃, ≤ 85%RH |
| Storage Temperature and Humidity |
Less than 20℃ ~ +60℃, ≤ 90%RH |
| Audio parameters |
Audio system |
Stereo |
| Speaker size |
≈ 99 x 45 x 20 mm |
| Impedance |
8 Ohm |
| Power |
2 x 5 Watt |
| Loudness |
> 80 Decibel |
| Interface |
4-pin connector |
| Built-in Android PCB Configuration (Choose one of two) |
CPU |
Quad-Core RK3288, 1.8GHz |
Quad-Core RK3568,2.0GHz |
| GPU |
Mali-T764 |
Mali-G52 |
| RAM |
2GB |
4GB |
| ROM |
32GB |
32GB |
| Android System |
Android 10.0 |
Android 11 |
| Ethernet |
1 x RJ45, 1,000 Mbps |
Ethernet 1,000 Mbps |
| Wireless Internet |
2.4Gigahertz |
2.4Gigahertz/5Gigahertz, Wi-Fi 6 |
| Bluetooth |
4.2 |
5 |
| Interface |
USB2.0 x 2 |
OTG USB2.0 x 1 |
| Power |
Power Supply |
Alternating Current 100V~240V, 50/60Hz |
| Maximum Power Loss |
≤ 30 Watt |
| Standby Mode Power Loss |
< 1 Watt |
| Features |
Operating Temperature |
0℃ ~ 50℃ |
| Storage Temperature |
Below 10℃ ~ +60℃ |
| Package Size |
Device Dimensions |
450.4 X 274.4 X 55.7 mm |
| Net Weight |
6.5 Kilogram |
| Package Size |
53 X 35 X 15 Centimeter |
| Gross Package Weight per Unit |
7 Kilogram |
From smart factory control consoles to hospital self-service registration machines, the Embedded Industrial Display, with its high-precision touch, multi-system compatibility, and military-grade protection, serves as the interactive foundation for Industry 4.0 and smart service scenarios, driving cross-industry equipment upgrades toward intelligence and efficiency.
if you would like to get the specification about above product, or you hope to discuss your requirements or need any additional information on our this product , then please do not hesitate to send us a inquiry and contact our sales team now.
