Customized Horizontal Vacuum Carbonization Furnace Machine With PLC Water Nitron Cooling
Price:
USD10,000-80,000/SET
MOQ:
1 set
Delivery Time:
60 days
Brand:
Jingtan
Product Description
Customized Horizontal Inert Gas Protective Vacuum Carbonization Furnace Hot New Resistance Furnace PLC Water Nitron Cooling
Products Description
Vacuum carbonization furnace usage:
Carbonization furnace is horizontal, but there are two types
1) The filament bundle is similar to the horizontal preoxidation furnace body structure, but because of the short residence time, several slit heating plate long furnace with different temperatures are used, and the filament bundle is not in contact with the heating surface;
2) Nonwovens or felt preoxidized wires can be selected from the carbonization furnace, but if the carbonization temperature is not high, it can also be carried out in the conveyor belt furnace.
Each carbonization furnace is equipped with inert gas inlet and outlet.
|
The maximum temperature
|
1800℃,2300℃
|
|
Volume at highest temperature
|
0.03m3,0.05m3, 0.1m3, 0.15m3,0.2m3 ,0.3m3
|
|
Furnace working atmosphere
|
Hydrogen, nitrogen, inert gases
|
|
Temperature Uniformity
|
≤±10℃
|
|
Temperature measurement
|
Far infrared optical temperature measurement
|
|
Temperature measurement Range
|
800~2400℃或0~2400℃
|
|
Temperature measurement accuracy
|
0.2~0.75%
|
|
Temperature Control accuracy
|
±1℃
|
|
Temperature control
|
Program control and manual control
|
|
Ultimate heating rate
|
200℃/ min (empty furnace, depending on high temperature zone volume and furnace structure)
|
Characteristics:
1) Graphite heating plate to use high purity, high density and high strength graphite plate, preferably isotropic graphite plate.Because its bending strength and compression strength are 2.8 times and 3.5 times of ordinary graphite, respectively.
2)The connection technology between the power supply and the electrode is very important. The connection is firm, the contact resistance is small, it is better to use specially processed graphite bolts. The cooling of the joint is a key technology, but also often prone to accidents, processing and welding technology must be in place. At the same time, standardized operation is also one of the elements to extend the service life. Water pressure switch and alarm should be provided for shell water cooling.
Characteristics:
3) The two ends of the furnace mouth are equipped with non-contact maze sealing device, and the sealed nitrogen is not straight in and out. Maintain positive pressure operation. Positive pressure operation is best between 9.8-49.0Pa.
4) The temperature of section ⅰ, ⅱ and ⅲ of the temperature zone can be independently regulated to meet the different requirements of different filament bundles on process conditions. Temperature measurement pay attention to the speculum clean and transparent,
strictly prevent mirror pollution.
5)The outlet end should be set up with a cooling device, so that the fiber is cooled below 500℃ before entering the space, to prevent oxidation. Because carbon fiber starts to slowly oxidize at 350 degrees Celsius in air. In addition to the water cooling system, the cooling device can also be cooled by nitrogen.
4) The temperature of section ⅰ, ⅱ and ⅲ of the temperature zone can be independently regulated to meet the different requirements of different filament bundles on process conditions. Temperature measurement pay attention to the speculum clean and transparent,
strictly prevent mirror pollution.
5)The outlet end should be set up with a cooling device, so that the fiber is cooled below 500℃ before entering the space, to prevent oxidation. Because carbon fiber starts to slowly oxidize at 350 degrees Celsius in air. In addition to the water cooling system, the cooling device can also be cooled by nitrogen.
Characteristics:
The design of carbonization furnace, not only to keep the determination of the internal pressure point mouth, but also to have a gas sampling mouth in the furnace, at any time to detect the composition of the gas in the furnace, especially the content of trace oxygen.
Company Profile
We are not your supplier,but your parter and supply the whole thermal treatment furnace solutions with strong R&D research team,stable supply chain with 14+ years experience under the strict ISO9001:2015 quality management system.
The State Intellectual Property Office of the People's Republic of China (SIPO), in accordance with the Patent Law of the People's Republic of China, examined and granted our patent rights:
Patent for high temperature graphitization furnace:
Patent for high temperature vacuum hot pressure furnace:
Patent for high temperature continuous furifing graphitization furnace:
Patent for carbonization sintering furnace:
Patent for bottom discharge graphitization furnace:
Patent for carbon fiber continuous furnace
Production process
Customers Photos
Customer cooperation cases
Our logistics system is all around the world.
FAQ
Are you a factory or trading company?
Q: Are you a factory or trading company?
A:Yes,we are China leading high-temperature vacuum furnace manufacturer 14+years,granted with many patent certifications in the domestic market.
Do you have customization or OEM service?
Q: Do you have customization or OEM service??
A:Yes,we have powerful R&D team and high-tech equipment.So we can not only supply the regular model,but also the customizable furnace as the repuirment of our clients.
What's your advantages?
Q:What's your advantages?
A:Quick response to your enquiry
High quality control
Stable supply chain in the domestic maket
Timely delivery
Excellent after-sales service,we can dispatch our engineer to the customer city for installation and debugging.
Contact me as follow:
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hunan Jingtan Automation Equipment Co., LTD.
Location
Building B4,Xinma Industrial Park, 959 Tianyi Avenue, Tianyuan District,Zhuzhou City,Hunan Province,China
Contact Person
Zola Liu