Sintered mesh filter cartridges are woven metal meshes that are formed through vacuum sintering, where each interconnection point between wire strands undergoes sintering treatment.

Quick details of Sintered Mesh Filter Cartridge

• Filer rating:2-200 μm
• Length:10", 20", 30", 40" or customized
• Diameter:65 mm, 70 mm or customized
• Connection type:M42, M30, M32, M20, 215, DOE, 226, 222 or customized
• Seal material:Silicon, NBR, EPDM, VITON
• Operating temperature:-200 °C to 650 °C.
• Permeability:0.02–20 L/cm2·min·pa
• Operating pressure:1 bar

Description of Sintered Mesh Filter Cartridge

Sintered mesh filter cartridge generally adopts standard 5-layer sintered wire mesh laminate as the filter medium.

• The surface layer is plain square weave wire cloth and this layer is the protective layer for the second filtration control layer.
• The filtration control layer determines the filtration rating. It can be square weave, Dutch weave, twill weave or other types of wire cloth.
• The third layer is usually same with the first layer, but often functions as dispersion and transition layer.
• The fourth and fifth layers are Dutch weave wire mesh, but with 90-degree variation. These two reinforcing layers give the sintered wire mesh support and strength.

Connection Type

Application Of sintered mesh filter cartridge

Sintered mesh filter cartridges are suitable for filtering high temperature and acid-base environments and are widely used in the following industries.

• Petrochemical. 

• Metallurgy. 

• Textile. 

• Food & beverage. 

• Electronics and pharmaceuticals. 

• Thermal power and nuclear power.