Polymer Li-ion Cell for Hazardous Area Devices 3.7V 1900mAh Jianheng
High-Reliability Polymer Li-ion Cell
For Hazardous Area Equipment & Intrinsically Safe Device Integration
The OiD124345-1900 is a premium-grade polymer lithium-ion battery cell engineered as a core power component for manufacturers developing equipment intended for use in hazardous or potentially explosive environments.
Produced by Shenzhen Jianheng Technology Co., Ltd, this cell is designed to deliver stable electrical performance, predictable energy behavior, and robust safety characteristics, supporting system-level explosion protection and intrinsically safe (IS) design concepts.
Engineered for System-Level Safety Integration
In hazardous area applications, explosion protection is achieved at the complete device level, not by individual components alone.
The role of the battery cell is to provide electrical stability, controlled energy release, and consistent behavior under stress, forming a reliable foundation for safety engineering.
The OiD124345-1900 supports this approach through:
-
Stable nominal voltage (3.7 V) with a flat discharge profile
-
Limited continuous charge and discharge capability (0.5C), facilitating current control
-
Low internal resistance to minimize heat generation
-
Strict factory voltage control to ensure predictable integration behavior
Important Notice
This lithium-ion cell is a component.
Final ATEX, IECEx, or other explosion protection certifications are obtained at the complete device level, through appropriate system design incorporating certified protective circuits, current limiting, thermal management, and safety barriers.
Shenzhen Jianheng Technology provides detailed technical data and test information to support customers’ safety engineering and certification processes.
Key Electrical Specifications
| Parameter | Specification | Value for IS-Oriented Design |
|---|---|---|
| Nominal Voltage | 3.7 V | Stable voltage platform |
| Rated Capacity | Min. 1900 mAh | Predictable energy budgeting |
| Max Charge Voltage | 4.2 V | Standard Li-ion integration |
| End-of-Discharge Voltage | 3.0 V | Controlled depth of discharge |
| Max Continuous Charge Current | 0.5C (950 mA) | Easier current limiting |
| Max Continuous Discharge Current | 0.5C (950 mA) | Supports energy control |
| Internal Resistance | ≤ 80 mΩ | Reduced internal heating |
| Nominal Energy | 7.03 Wh | Suitable for low-power IS devices |
Operating Temperature Characteristics
| Mode | Temperature Range | Condition |
|---|---|---|
| Charging | 15 ~ 45°C | 0.5C CCCV |
| Charging (Low Temp) | 5 ~ 15°C | 0.2C CCCV |
| Discharging | -10 ~ 45°C | 0.2C – 0.5C |
Charging below 0°C is not permitted due to lithium plating risk and reduced cycle life.
Rigorous Cell-Level Safety & Reliability Testing
The following tests demonstrate the inherent robustness of the cell, providing a reliable basis for device-level explosion protection design:
-
Overcharge resistance (no fire, no explosion)
-
Over-discharge tolerance
-
Thermal cycling (-40°C to 75°C)
-
Mechanical shock and vibration
-
Drop test (1.0 m)
-
High temperature & high humidity exposure
-
Low pressure (aviation transport conditions)
These results confirm the cell’s suitability as a high-reliability power component in safety-critical designs.
Typical Integration Scenarios
(For Certified Equipment)
-
Portable gas detectors and air quality monitors
-
Intrinsically safe sensors and transmitters
-
Inspection and maintenance instruments for oil & gas facilities
-
Industrial IoT devices intended for hazardous locations
-
Emergency and safety equipment
All applications require appropriate certified protective circuitry and system-level approval.
Mechanical Dimensions (mm)
| Item | Specification |
|---|---|
| Thickness | ≤ 12.0 mm |
| Width | ≤ 43.0 mm |
| Height | ≤ 45.0 mm |
| Tab Width | 5.0 ±0.2 mm |
| Tab Length | 9.0 ±1.0 mm |
Dimensions measured at 50% state of charge.
Storage & Handling
-
Recommended storage voltage: 3.70 – 4.00 V
-
Storage SOC: approx. 50%
-
Recharge interval: every 6 months (3 months with PCM)
-
ROHS compliant materials and packaging
Resources & Technical Support
-
Download Full Product Specification (PDF)
-
Request Detailed Safety Test Data
-
Contact Our Technical Team for Integration Support
Our engineering team supports customers during product development, validation, and certification preparation.
Manufacturer
Shenzhen Jianheng Technology Co., Ltd
Specialized in lithium-ion cells and battery solutions for industrial and safety-critical applications.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
