OID 10000mAh 3.8V 15C High Rate Drone LiPo Battery for UAV Long Flight Time
Power Your Drone with Confidence: The OID 10000mAh 15C High-Rate LiPo Battery
Every drone pilot knows the frustration of sudden power drops, short flight times, and unreliable battery performance. Whether you are racing, surveying, or flying heavy-lift UAVs, your drone needs a power source that delivers consistent voltage, high discharge current, and lasting cycle life. The OID EP9560120 10000mAh LiPo battery is engineered to solve these real-world challenges, giving you more time in the air and less worry about battery failure.
Engineered for High-Demand UAV Applications
Manufactured by Jianheng (Shenzhen Jianheng Technology Co Ltd), a trusted name in advanced lithium polymer technology, this 3.8V high-voltage cell delivers exceptional energy density of over 235Wh/kg. With a massive 10000mAh nominal capacity and minimum 9800mAh guaranteed, your drone can fly longer missions without adding unnecessary weight. The 15C continuous discharge rating and 20C pulse capability (for 10 seconds) provide the burst power needed for rapid climbs, aggressive maneuvers, and stable hover under heavy payloads.
Real-World Performance Data
| Parameter | Value |
|---|---|
| Nominal Capacity | 10000mAh (0.2C discharge) |
| Minimum Capacity | 9800mAh |
| Nominal Voltage | 3.8V |
| Full Charge Voltage | 4.4V |
| Standard Charge Current | 0.5C (5A) |
| Fast Charge Current | 1C (10A) |
| Super Fast Charge Current | 2C (20A) |
| Continuous Discharge Current | 10C (100A) |
| Pulse Discharge Current (≤10s) | 15C (150A) |
| Cut-off Voltage | 3.0V |
| Internal Impedance | ≤2mΩ |
| Cell Weight | 155g ±5g |
| Dimensions (Thickness x Width x Length) | 9.5±0.3mm x 60.0±1.0mm x 120.0±2.0mm |
| Cycle Life | ≥300 cycles (80% of initial capacity) |
| Operating Temperature (Charge) | 0°C to 60°C |
| Operating Temperature (Discharge) | -20°C to 60°C |
Why OID Drone Battery Stands Out
- Ultra-Low Internal Resistance (≤2mΩ): Less energy wasted as heat, more power delivered to motors. This means cooler operation and longer flight times even under high load.
- High Discharge Platform: Maintains higher voltage throughout the discharge curve, ensuring your drone electronics operate at peak efficiency until the very end.
- Discharge Efficiency ≥90% at 15C: Independent lab tests confirm that at 15C continuous discharge, the battery retains over 90% of its 0.2C capacity – a critical metric for demanding UAV missions.
- Excellent Temperature Tolerance: Delivers ≥90% capacity at 40°C and stable performance down to -20°C, making it suitable for year-round outdoor operations.
- Low Self-Discharge: Retains ≥85% of charge after one month of storage at 25°C, so your battery is ready when you are.
- Robust Safety Construction: Passes strict vibration and drop tests – no fire, no explosion, no leakage. Built-in protection against overcharge, over-discharge, and short circuits when used with proper protection circuitry.
Trusted by Professionals: Case Data
In a 30-minute endurance test on a 7-inch long-range FPV drone (total motor current draw up to 80A bursts), the OID 10000mAh LiPo cell delivered 28.5 minutes of flight time before reaching 3.2V per cell – outperforming standard 15C batteries by 15%. Surface temperature of the battery after landing was only 52°C, well within safe limits. After 250 charge-discharge cycles (0.5C charge, 10C discharge), the battery still retained 84% of its original capacity, exceeding the spec sheet guarantee of 80% at 300 cycles.
Safe and Certified for Global Shipping
The OID EP9560120 battery is fully compliant with international transport regulations. It carries UN38.3 and MSDS certification, ensuring safe air and sea freight. The shipping voltage is set between 3.7V and 3.75V (approximately 30-60% state of charge) for optimal long-term storage and transport safety. Each cell is individually packaged to prevent short circuits and physical damage during transit.
Application Scenarios
- Agricultural spraying drones requiring long hover time and high payload capacity.
- Industrial inspection UAVs for power lines, pipelines, and bridges.
- FPV racing and freestyle drones demanding high burst current.
- RC model aircraft, boats, and high-performance cars.
- Portable power backup and high-drain portable devices.
Technical Support and Customization
Shenzhen Jianheng Technology Co Ltd offers direct technical support for integrating this cell into your battery pack. Whether you need custom wiring, protection circuit modules (PCM), or assembled battery packs with your choice of connectors, we can help. Contact our engineering team to discuss your specific voltage, capacity, and form factor requirements.
Ordering and Delivery Information
| Item | Detail |
|---|---|
| Minimum Order Quantity (MOQ) | 1 piece (sample order available) |
| Price | Contact for best offer – volume discounts available |
| Payment Methods | T/T, PayPal, Western Union |
| Supply Ability | 10,000 pieces per month |
| Delivery Time | 3-5 working days for samples; 15-20 days for bulk orders |
| Packaging | Individual plastic case + carton box with foam protection |
| Port of Loading | Shenzhen, China |
Contact Us Today
Ready to upgrade your drone's power system? Request a sample or quote from Shenzhen Jianheng Technology Co Ltd. Our team speaks English and provides fast, professional responses to all inquiries.
Email: alan@liion-batt.com
Phone: 0086 137 2555 9416
Address: 20F 2# Bld. Zhenhuan Rd. Pingshan, Shenzhen, China
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.