Inconel 783 Bars Low Expansion Alloy – High Strength Inconel 783 Bars For Load Bearing Components
Inconel 783 Bars Low Expansion Alloy – High Strength Inconel 783 Bars for Load Bearing Components
Product Description – Inconel 783 Bars Nickel Iron Alloy Bar
Inconel 783 Bars are precipitation-hardened nickel-iron-cobalt alloy bars designed for structural and load-bearing applications requiring controlled thermal expansion and stable mechanical performance at elevated temperatures. Unlike conventional high-temperature alloys that prioritize strength alone, Inconel 783 Bars are engineered to deliver a balanced combination of low thermal expansion, oxidation resistance, and reliable strength under thermal cycling conditions. This makes them especially suitable for precision components where dimensional stability is critical during heating and cooling cycles.
The alloy achieves its performance through a carefully controlled composition, where aluminum and niobium enable precipitation strengthening while maintaining structural integrity over extended service periods. Inconel 783 Bars exhibit good resistance to oxidation and scaling at temperatures approaching 700°C, making them suitable for use in gas turbine assemblies, power generation systems, and high-temperature fastening applications. Their relatively low coefficient of thermal expansion reduces distortion in assembled structures, a key requirement in high-efficiency energy systems widely used in Europe and North America.
In bar form, the material is particularly suited for machining into shafts, fasteners, connectors, and precision-engineered components. It offers good machinability in the solution-treated condition, followed by enhanced strength through aging treatment. For applications requiring both dimensional control and mechanical reliability, Inconel 783 Bars provide a specialized and performance-driven solution for modern industrial systems.
Inconel 783 Bars Specification Table – Dimensions & Standards
| Parameter | Value |
|---|---|
| Diameter | 10 mm – 300 mm |
| Length | 1000 mm – 6000 mm |
| Surface | Black, Peeled, Polished |
| Form | Round Bar / Forged Bar |
| Standards | AMS 5896, UNS R30783 |
Inconel 783 Bars Chemical Composition (Alloy 783)
| Element | Content (%) |
|---|---|
| Nickel (Ni) | 24.0 – 28.0 |
| Cobalt (Co) | 24.0 – 28.0 |
| Iron (Fe) | Balance |
| Chromium (Cr) | 2.8 – 3.5 |
| Aluminum (Al) | 5.4 – 6.0 |
| Niobium (Nb) | 2.5 – 3.0 |
| Titanium (Ti) | ≤ 0.5 |
| Manganese (Mn) | ≤ 0.5 |
| Silicon (Si) | ≤ 0.5 |
| Carbon (C) | ≤ 0.05 |
| Boron (B) | ≤ 0.01 |
Inconel 783 Bars Mechanical Properties
| Property | Value |
|---|---|
| Tensile Strength | ≥ 800 MPa (aged condition) |
| Yield Strength | ≥ 500 MPa |
| Elongation | ≥ 15% |
| Hardness | ≤ 35 HRC |
Inconel 783 Bars Physical Properties
| Property | Value |
|---|---|
| Density | 7.9 g/cm³ |
| Melting Range | 1350 – 1400°C |
| Thermal Conductivity | 13.0 W/m·K |
| Elastic Modulus | 200 GPa |
| Coefficient of Thermal Expansion | 10.5 µm/m·K (20–100°C) |
Inconel 783 Bars Key Features – Structural Alloy Bar Advantages
- Low thermal expansion for dimensional stability
- High strength after precipitation hardening
- Good oxidation resistance at elevated temperatures
- Suitable for load-bearing and structural applications
- Reliable performance under thermal cycling conditions
- Ideal for machining into precision components
Inconel 783 Bars Applications – Alloy 783 Bar Uses
Inconel 783 Bars for Structural Components
Used in shafts, connectors, and load-bearing assemblies
Inconel 783 Bars in Gas Turbine Systems
Applied in high-temperature structural and support components
Inconel 783 Bars for Power Generation Equipment
Used in components requiring thermal stability and strength
Inconel 783 Bars in Fasteners and Machined Parts
Suitable for bolts, studs, and precision-machined elements
Inconel 783 Bars for High Temperature Engineering
Applied in systems requiring controlled expansion and durability
Inconel 783 Bars Frequently Asked Questions (FAQ)
What makes Inconel 783 Bars suitable for structural applications?
They combine low thermal expansion with stable mechanical strength, reducing distortion under heat.
Are Inconel 783 Bars suitable for machining?
Yes, they can be machined in the solution-treated condition and then aged for strength.
Can Inconel 783 Bars handle high temperatures?
Yes, they perform reliably up to approximately 700°C.
Where are Inconel 783 Bars commonly used?
They are used in turbines, power systems, and structural high-temperature components.
Do Inconel 783 Bars resist oxidation?
Yes, they offer good oxidation resistance in elevated temperature environments.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.