10kVA 1/1 Single Phase Rack Mounted Ups Power Supply

Input Parameters

• Rated Power: 10kVA/10kW
• Cold Start: Default output 50/60Hz
• Input Voltage Range: 110~288VAC; 100% load @>176VAC; 90% load @>154VAC; 75% load @>132VAC; 50% load @>110VAC
• Input Power Factor: ≥0.99
• Frequency Range: 40~70Hz

Output Parameters

• Rated Voltage: 220/230/240VAC, 200/208VAC (PF=0.9)
• Output Power Factor: 1.0
• Load Response: ≤5% (0% - 100% - 0% step load)
• Recovery Time: ≤40ms (0% - 100% - 0% step load)
• Output THDu: ≤1% (linear load), ≤5% (non-linear load according to IEC62040-3)

Transfer Time

• Main to Battery: 0ms
• Inverter to Bypass: 0ms

Efficiency

• Normal Mode Efficiency: Up to 95%

Noise

• Noise Level: <58dB

Overload Capacity

• Normal Mode:
  • 105%~110%: 10 minutes
  • 111%~125%: 1 minute
  • 126%~150%: 30 seconds
• ECO Mode:
  • <125%: Long time
  • 126%~130%: 5 minutes
  • 131%~150%: 1 minute

  • 150%: 200ms

Battery Parameters

• Battery Type:
  • SS010BR: 12VDC/9Ah
  • SS010LR: External battery
• Battery Number:
  • SS010BR: 16 pieces
  • SS010LR: 16-24 pieces (settable)
• Max Charging Current:
  • SS010BR: 1A (default), settable up to 5A
  • SS010LR: 1A (default), settable up to 5A
• Battery Voltage:
  • SS010BR: 192VDC (default), settable
  • SS010LR: External battery

Standards and Communication

• Communication Interfaces: RS232, EPO, RS485

Options

• Optional Features: AS400, USB, SNMP card, 12A charger, Parallel kit, Air filter

Dimensions and Weight

• Dimensions (W×D×H) mm:
  • SS010BR: 440×660×172
  • SS010LR: 440×580×86
• Weight (kg):
  • SS010BR: 63
  • SS010LR: 18

Characteristics

• Intelligent Battery Management: Smart battery management system.
• Wide Input Voltage Tolerance: Adaptable to a broad range of input voltages.
• 3-level Topology: High performance and efficiency.
• Adapt to Half-wave Load: Suitable for half-wave load conditions.
• Auto Fault Waveform Recording: Automatic recording of fault waveforms.
• Online Double Conversion: Full digital control for reliability.
• Self-aging Function: Energy-saving test function.
• High Load Adaptability: Output PF=1 for better load adaptability.
• High Power Density: 10kW in 2U space.