Professional Formula with Advanced Anti-Friction Metallic Compounds

Super Oil Treatment utilizes a professional-grade formula containing advanced anti-friction metallic compounds. These compounds quickly form a protective metallic layer on the engine's friction surfaces, helping repair worn parts and restoring the cylinder's sealing capability. By using this product, you can improve engine performance, reduce blue smoke, minimize noise and friction, and prevent carbon buildup and sludge formation -- all while protecting your engine's vital components.

• Rapidly repairs worn friction surfaces
• Improves engine power and fuel efficiency
• Reduces blue smoke, oil consumption, and exhaust emissions
• Lowers engine noise and wear
• Prevents sludge, carbon deposits, and corrosion
• Extends engine lifespan

1. Change engine oil and oil filter before use. Warm up the engine for 5 minutes at idle, then switch off.
2. Pour one can into the engine oil chamber and restart the engine. Idle for at least 15 minutes.
3. Dosage guideline:
   • One can for 4-6 cylinder engines
   • 5% of engine oil volume for larger engines
4. Repeat every 12,000-15,000 km for best results.

Suitable for 4- and 6-cylinder engines with more than 50,000 km mileage.

• Use only when the engine oil chamber is clean.
• Clean with GETSUN 5-min Motor Flush first if the engine interior is dirty.
• Not suitable for damaged engines (e.g. broken piston rings).
• Store in a cool, dry place below 45°C and keep out of reach of children.
• Do not ingest.
• If swallowed, induce vomiting and seek medical help immediately.
• In case of eye contact, rinse thoroughly with water.

• Content: 443 ml
• Packaging: 24 pcs/ctn