Multi Sensor Fusion UAV Detector , Drone Detection And Jamming Device
UAV Detector With Multi-Sensor Fusion Combining Drone Jammer Device
Introduction
This integrated defense system leverages AI-driven multi-sensor fusion and adaptive jamming protocols to detect, classify, and neutralize unauthorized drones across diverse operational environments. The core detection architecture employs spatiotemporal deep learning models that fuse radar micro-Doppler signatures with RF protocol metadata (e.g., DJI OcuSync, Autel SkyLink), achieving 99.1% classification accuracy even against custom-built drones employing frequency-hopping techniques35.The jamming subsystem implements cognitive RF suppression across 70MHz–6GHz spectrum, combining protocol-aware interference (2.4GHz/5.8GHz control links) with GNSS spoofing (L1/L2/L5 bands) to disrupt navigation and command chains. A reinforcement learning controller dynamically adjusts jamming waveforms based on real-time SNR measurements and UAV evasion patterns, achieving 98.3% neutralization success rate at 4km range while maintaining aviation-compliant power levels.
Basic
|
Function |
Description |
||
|
UAV detection |
Detection spectrum bandwidth |
70 MHZ - 6GHZ |
detection focus on the 433Mhz/ 900Mhz/2.4Ghz/5.2Ghz/5.8Ghz |
|
Simultaneous screening number of UAV |
≧150pcs |
can be customize with 1Ghz -1.4Ghz & 5.1Ghz - 5.9Ghz FPV Bands |
|
|
The lowest detection height |
≦0 meters |
||
|
Detection rate |
≧99.99 % |
||
|
White and Blacklist |
Number of identifiable models |
≧ 400 |
including DJI series drones,and it has the autonomous learning ability |
|
the accurate identification of target |
Available |
for different targets of the same position, same frequency band, same manufacturer, same type of UAV respectively. |
|
|
in-depth analysis of UAV signal |
|||
|
the identification of unique ID |
|||
|
the black and whitelist to distinguish |
|||
|
Defensive Interference |
Interferable frequency bands |
900MHz, 433Mhz, 1.5ghz, 2.4ghz, 5.8ghz, 5.2Ghz |
|
|
other customized frequency bands |
|||
|
Remote OAM |
Unattended Mode |
Automatic detection and strike |
|
|
A variety of OAM features |
Firmware updating |
used with the remote server |
|
|
Reset, status inquiry |
|||
|
Self-testing |
|||
|
Parameter configuration |
|||
|
Networking |
Multi-device networking |
observe the online/abnormal status of each device |
|
|
Remote control through mobile terminals |
viewing the operating interface of the device system |
||
|
receiving alarm information |
|||
|
viewing the black and whitelist |
|||
|
turning on defense function |
|||
|
Data security |
High reliability and security |
certificate management and data encryption |
|
Interface Showcase
- As shown in the figure, we have constructed a complete detector by using a multi-sensor fusion system, and it can detect unmanned aerial vehicles with extremely high frequency response.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.