DJI Drone Remote ID Decoder Module 15km Range 5-36V Power
Price:
2588
MOQ:
1
Delivery Time:
7 work day
Brand:
Aeroseek
Product Description
DJI Drone Remote ID Recognition And Decoding Modules
The DJI SDR01 drone message parsing module supports Remote-ID (China GB42590-2023, US ASTM F3411-22a, EU ASD-STAN PrEN4709-002) and Drone-ID for drones including DJI Mavic 2, Mavic 3, Air3S, and Matrice 4. It analyzes detailed drone and pilot location information with a detection range exceeding 15 km. For drones using encrypted Drone-ID messages (such as Air3S, Matrice 4, and Mavic 4 Pro), the module automatically connects to a decryption server to process encrypted data.
Key Features
- Extended detection range: Maximum detection range exceeds 15km with close-range refresh rates up to 60 times per minute
- Simplified integration: Supports 5-36V wide-voltage power supply with Ethernet and serial port output interfaces
- Reliable decryption: Integrated with decryption server cluster providing 24/7 high-reliability service
- Secure operation: After initial detection, secret key exchange enables offline operation without transmitting dynamic coordinates to third-party servers
Technical Specifications
| Receiving frequency band | 2.4G/5.8G |
| Effective detection range | 500m-15km (varies by drone and environment) |
| Data refresh rate | ≥60 times/minute (close-range, Air3 test) |
| Positioning accuracy | ≤10m |
| Power supply | 5-36V |
| Antenna connector type | SMA female x 2 (internal board uses 2 x IPEX 1st generation female connector) |
| Communication interfaces |
1) Ethernet port: 1 2) UART serial communication interface: 2 channels, 3.3V-TTL, baud rate 115200 3) GPIO port: 8 |
| Operating power consumption | Analyzer module ≤5W; LNA ≤4W |
| Operating environment | -40°C to +65°C |
| Dimensions | Analyzer module: 100mm × 68mm × 14mm LNA: 84.5mm × 34mm × 19mm |
Module Interface Specifications
| Interface | Pin Number | Function Description | Remarks |
|---|---|---|---|
| 2.4GHz Antenna Port (SMA) | / | Connect a 2.4GHz antenna | In strong interference environments, additional bandpass filters are required |
| 5.8GHz Antenna Port (SMA) | / | Connect a 5.8GHz antenna | In strong interference environments, additional bandpass filters are required |
| 24/58 RF Output Port (SMA) | / | Output combined amplified 2.4GHz and 5.8GHz signal | Used to connect to the message analysis module RX1 |
| RET | / | Programming button | This button needs to be pressed when updating the firmware |
| Power supply and 3.3v TTL data interface (mx1.25) | 1 | ACC | 5-36V |
| 2 | GND | ||
| 3 | GND | ||
| 4 | TXD | ||
| 5 | RXD |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen Polaris Security Technology Co., Ltd.
Location
3rd Floor, Minlida Industrial Park, Industrial South Area, Liuxian Avenue, Nanshan District,Shenzhen City, Guangdong Province, China
Contact Person
Leo