10.8V 4.4Ah Rechargeable Medical Defibrillator Battery for Cubtm102A and Cu-HD1 with 300-500 Charge Cycles
Price:
USD
MOQ:
1
Delivery Time:
Negotiable
Product Description
Replacement Battery for Cubtm102A Cu-HD1 Medical Defibrillator
This replacement battery is specifically designed for Cubtm102A and Cu-HD1 medical defibrillator lead wires. It features a rated voltage of 14.8V, capacity of 4.2Ah, and energy density of approximately 62.16Wh. The battery dimensions precisely match the original specifications and include a built-in proprietary communication protocol chip to prevent "uncertified battery" errors.
Key Features
- Powers the Cu-HD1 defibrillator for automated external defibrillation, manual defibrillation, synchronized cardioversion, transcutaneous pacing, and patient monitoring
- Provides approximately 30 minutes of backup power for critical signal monitoring when main battery power is low, preventing ECG data loss during emergencies
Technical Specifications
| Product Name | Battery |
|---|---|
| REF | Cubtm102A |
| Type | Rechargeable |
| Input power | 100-240V, 50-60HZ, 1.4A |
| Output power | 18V, 5.8A, 104.4W / 12V, 0.5A, 6.0W |
| Packing | 1pc/box |
| Condition | New Original |
| Battery Life | 300-500 cycles |
| Size | 169x104x50mm |
| Weight | 585g |
| Color | White |
Frequently Asked Questions
Q1: The battery is taking too long to charge (8-10 hours) and still not fully charged. What should I do?
A1: If the defibrillator's main unit uses high-power functions during monitoring, a 30% battery consumption in 10 minutes is normal. If only basic functions are enabled, the battery may be experiencing capacity degradation. Test the battery in another device. If the problem persists, replace the battery.
Q2: Can this battery be charged with a mobile phone charger or another brand's defibrillator charger?
A2: No. Mobile phone chargers have incompatible voltage outputs, and other defibrillator chargers use different protocols. Using non-certified chargers may cause incomplete charging, overheating, or safety hazards. Always use the original Cubtm102A/Cu-HD1 charger or certified replacements.
Q3: After long-term storage, I noticed white powder on the battery surface. Can I continue using it?
A3: No. White powder indicates battery leakage and electrolyte reaction with air. Continued use may corrode contacts, cause equipment failure, or create short circuit risks. Replace the battery immediately.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
China World Technology Battery Service Group
Location
Laodong North Road,Yushui district XinYu city,JiangXi province,China
Contact Person
Tina Chen