50-50KN/M Reinforced  Airport Runway Fiberglass Geogrid  Asphalt Placement Biaxial Glassgrid

Fiberglass Geogrid Production Introduction :

Asphalt Reinforcement Fiberglass Geogrid is made of high quality fiberglass reinforced alkali glass fiber yarn,

 use of advanced warp woven into the substrate,using warp directional structure,make full use of fabric yarn strength,improve its mechanical properties.

 Yixing Shenzhou 50-50KN/M Fiberglass Geogrid Key Technical Advantages:

1. Balanced Biaxial Strength (50×50 kN/m)
2. Ultra-Low 3% Elongation Under Load
3. Temperature Resistant (-50°C to +250°C)
4. Reflective Crack Reduction Up to 70%
5. Easy to Install – Immediate Asphalt Overlay Possible

Fiberglass Geogrid Specification

Before Coated Bitumen                                            After Coated Bitumen

Mesh Size 25.4x25.4mm                                           Mesh Size 12.8x 12.8 mm

Fiberglass Geogrid Function:

high temperature resistance (mostly used in the construction of asphalt pavement), function

1. Effective reinforcement and anti-cracking, effectively prolonging the life of the road

 (asphalt pavement, cement concrete pavement subgrade reinforcement)

2. It has high tensile strength and low elongation in both directions of warp and weft, and has excellent properties

such as high temperature resistance, low cold resistance, aging resistance, and corrosion resistance.

3. Slow down cracking

Fibergalss Geogrids is widely use in many fields :

1. Road surface asphalt overlay construction engineering,asphalt layers reinforcement.

2. Converting old cement concrete road into composite road, restraining reflection cracking caused by block shrinkage.

3. Road extension, preventing and controlling the cracking caused by new and old combination and uneven settlement.

4. Treatment of the conjunction between tunnel and bridge or foundation.