Seven-Tank 60KW Ultrasonic Cleaner for Optical Lenses with 80kHz Frequency and 0.1μm Particle Removal

This specialized seven-station manual cleaning system is engineered specifically for optical lenses, including glass/plastic lenses, prisms, and filters. The integrated process delivers micron-level cleanliness with zero surface damage, achieving 99.95% impurity removal rate and surface roughness control of Ra≤0.1nm.

• Dual-frequency ultrasound: 80kHz high-frequency cleaning with 100-300W adjustable power
• Cavitation bubble diameter ≤30μm with sweep technology (±2kHz fluctuation)
• Temperature control accuracy ±0.5°C (40-60°C alkaline cleaning, pH=10-11)
• 8mm thick polypropylene (PP) tank construction resistant to cleaning agents

• Adjustable pressure: 0.3-0.8MPa
• Dual nozzle system: fan-shaped (30° angle) and needle-shaped (0.5mm aperture)
• Pure water countercurrent rinsing with DI water resistivity ≥18.2 MΩ·cm
• Manual fine adjustment bracket with ±15° tilt angle for curved surfaces

• Controllable lifting speed: 1-5mm/s with ±0.1mm accuracy
• IPA (isopropanol) dehydrating agent reduces surface moisture to <0.01%
• Anti-collision design with 2mm silicone pads and PEEK material lens baskets

• Two-stage temperature control: preheating (50-60°C) and constant speed (70-80°C)
• Clean hot air circulation (Class 100) at 5m/s wind speed
• Infrared temperature measurement with ±1°C accuracy
• Dries 10 pieces of 100mm diameter lenses within 30 minutes