Stainless Steel A213 TP316L Heat Exchanger Tube In Condenser And Evaporator
| Certification | ASME, U STAMP, API, ASME, ABS, LR, DNV, GL, BV, KR, TS, CCS |
|---|---|
| Tube Material | TP304L, TP316L, TP309S, TP310H, TP321, TP347 |
| Length | Max 34M/PC |
| O.D. | 6-50.8mm |
| W.T. | 0.5-15mm |
| Testing | UT, ET, HT, PMI |
| Grade | UNS Designation | C | M | P | S | Si | Ch | Ni | Mo | N | Nb | Ti | Other |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TP316L | S31603 | 0.035 | 2 | 0.045 | 0.03 | 1 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | ... | ... | ... | ... |
- Steam Power Plants: Used in condensers and boilers to transfer heat between steam and water.
- Reactor Cooling: Maintains optimal temperatures in chemical reactors.
- Heat Recovery: Captures and reuses heat in processes to improve efficiency.
- Refineries: Used in distillation columns and heat exchangers for crude oil processing.
- Natural Gas Processing: Helps in cooling and heating processes during gas treatment.
- Chillers and Boilers: Used in air conditioning systems to transfer heat from the refrigerant to the air or water.
- Heat Pumps: Involved in transferring heat between indoor and outdoor environments.
- Ship Cooling Systems: Used in engine cooling and HVAC systems on ships.
- Ballast Water Treatment: Helps in regulating water temperatures for treatment processes.
- Efficient heat transfer
- Space utilization
- Corrosion resistance
- Easy to make cleaning and inspection
- High pressure and high temperature resistance
- Improve overall energy efficiency and reduce energy consumption
- Straight Tubes: Simple design, used in basic systems.
- U-Tubes: Allow for thermal expansion.
- Fin Tubes: Feature fins to increase surface area for better heat transfer.
They facilitate heat transfer by allowing one fluid to flow through the tubes while another fluid flows around them, enabling thermal energy exchange without mixing.
Key factors include flow arrangement (counterflow, parallel flow), surface area, temperature, pressure, and the properties of the fluids being used.
Strength is evaluated through methods such as hydrostatic testing, non-destructive testing (NDT), and inspections for wall thickness and material integrity.
Our YUHONG HOLDING GROUP has been in this area for more than 35 years and exported to more than 85 countries. Till now we have 4 big joint venture factories, the total production area more than 130,000 square meters, and more than 600 workers with 106 production lines give our clients excellent supporting always. One of the factory is the manufacturer of stainless steel tube which is used for heat exchanger, evaporator, boiler, cooling system.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.