FU-77V Keyence Photoelectric Sensor 200mm Range Anti Noise Stainless Fiber Optic Sensor
| Attribute | Value |
|---|---|
| Lighting Method | Coaxial, Diffuse, and Dark Field |
| Manufacturer | Keyence |
| Light Source | White LED |
| Payment Term | Paypal/TT/Western Union/Trade Assurance |
| Timer | OFF/ON delay/OFF delay/One-shot |
| Measurement Tools | Edge Detection, Pattern Matching, and Color Identification |
| Package | Package |
| Paper Box | Industrial Automation |
The GF Flowline FU-77V is an intrinsically safe, microprocessor-based electro-pneumatic positioner engineered for precise valve actuation in hazardous process environments. Featuring an aluminum-alloy housing with ATEX/IECEx Zone 1/21 certifications, it converts 4-20mA control signals into pneumatic output (0.2-1.6 MPa) to position rotary or linear valves with 0.15% accuracy. The unit integrates dual-pressure sensors, adaptive digital tuning (DynaTune®), and an OLED display for real-time diagnostics. Designed for DIN rail or direct valve mounting (ISO 5211), its IP66/NEMA 4X-rated enclosure withstands extreme temperatures (-40°C to +85°C), vibration (10g @ 55Hz), and corrosive atmospheres. Supports NAMUR NE 107 diagnostics and SIL 2 safety compliance for critical control applications.
Mission-critical performance parameters:
- Accuracy: ±0.15% full scale (ASME B40.100 compliant)
- Supply Pressure: 1.4-7 bar (20-100 psi)
- Air Consumption: 0.01 Nl/min (steady state)
- Output Pressure: 0.2-1.6 MPa (adjustable split range)
- Signal Input: 4-20mA HART 7 (2-wire), passive/active selectable
- Dead Band: <0.05% (field-adjustable)
- Hazardous Certifications: ATEX II 1G Ex ia IIC T6 Ga / II 1D Ex ia IIIB T85°C Da
- Strobe Angle: 30-90° (rotary) / 20-100mm (linear)
- Response Time: <3 sec for 90° travel
- Comms Protocol: HART 7, Foundation Fieldbus, Profibus PA (optional)
- Enclosure: Cast aluminum (hard-anodized) + AISI 316L stainless hardware
Critical process valve control scenarios:
- Oil & Gas: Emergency shutdown valves (ESD) in ATEX Zone 1 refineries
- Chemical Processing: Chlorine control valves with 0.1 MPa backpressure compensation
- Power Generation: SCR dampers in coal-fired boilers (SIL 2)
- Pharma/Bio: Steam-sterilizable bioreactor feed valves (3-A Sanitary Standard)
- Water Treatment: Slurry knife-gate valves in FGD scrubbers
- Mining: Explosion-proof damper control in dust collection systems
Compatible with pneumatic actuators from Rotork, and AUMA.
Industry-leading precision and reliability:
- Autocalibration: DynaTune® adaptive algorithm tunes valve in 20 seconds
- Zero Air Waste: Pilot relay design eliminates continuous bleeding
- Hazardous Area Safety: Integrated galvanic isolator (250Vrms)
- Reverse Action: Instant NC/NO configuration via OLED menu
- Seismic Resilience: NASA-grade anti-resonance mounting brackets
- Predictive Maintenance: Tracks valve friction/stiction via ∆P analytics
Patented AutoStroke™ function compensates for actuator spring-rate variations.
Advanced diagnostic intelligence:
- Onboard Diagnostics: NAMUR NE 107 status indicators (F/S/M/U)
- Travel Profiling: Stores 1,000 cycle plots for performance trending
- BLE/Wi-Fi: Wireless configuration via GF FlowView mobile app
- Multi-drop Capability: 16 devices per loop (HART multidrop)
- Steam Robustness: 10,000+ steam-qualified cycles at 160°C
- Cybersecurity: IEC 62443-3-3 compliant encryption
- Cloud Integration: GF-Sentry™ remote monitoring with API
Tracks stem position, air supply, and calibration history with 0.01% resolution.
| Parameter Category / Specific Parameter | Typical Value / Description |
|---|---|
| Product Type | Electro-Pneumatic Valve Positioner |
| Model Number | FU-77V |
| Primary Function | Precisely controls the pneumatic actuator position based on an analog input signal, ensuring the valve stem reaches the commanded position. |
| Input Signal | 4-20 mA DC (Standard, 2-wire); Optionally 0-20 mA, 0-10 V DC, or others (may require configuration/different variant). |
| Supply Air Pressure | 1.4 - 7 bar (20 - 100 psi) |
| Output Air Pressure | Adjustable, tracks input signal proportionally (e.g., 0.2 - 1.0 bar / 3 - 15 psi for 3-15psi actuators; scales with supply). |
| Air Consumption (Static) | < 0.1 Nl/min (Typically very low when steady state) |
| Air Consumption (Dynamic) | Dependent on actuator size and stroking speed; Specified in liters/min or scfm at defined pressure. |
| Accuracy | ≤ ±0.5% of span (Full Scale) (High precision class typical for GF positioners) |
| Hysteresis | ≤ 0.2% of span |
| Linearity | ≤ ±0.5% of span |
| Repeatability | ≤ 0.1% of span |
| Response Time | Adjustable (Typically 1-30 seconds for full stroke); Fast response versions available. |
| Housing Material | Robust Plastic (e.g., Polyamide/PA) or Aluminum Alloy; Corrosion resistant. |
| Protection Rating | IP65 / IP66 / IP67 (Dust-tight & protected against water jets/immersion) - Common standard. |
| Ambient Temperature Range | -30°C to +85°C (-22°F to +185°F) [Operating]; Wider storage range possible. |
| Process Temperature Range | -60°C to +200°C (-76°F to +392°F) or higher (Depends on stem extension/connection kit used). |
| Mounting | Direct mount to rotary (ISO 5211) or linear actuators (IEC 60534-6 / VDI/VDE 3845); Feedback lever included. |
| Electrical Connection | M20 x 1.5 or ½" NPT conduit entries; Terminal block (screw or spring clamp). |
| Pneumatic Connections | Input (Supply): ¼" NPT or G ¼; Outputs (A/B): ¼" NPT or G ¼ (Depending on actuator type - Single or Double Acting). |
| Compliance & Certifications | ATEX / IECEx (Ex ia/ib IIC T4...T6 Ga/Gb), CE, SIL 2/3 (IEC 61508), EAC, FM, CSA (Specific approvals depend on variant & market). Critical for hazardous areas. |
| Communication (Optional) | May support HART protocol (over 4-20mA) or Foundation Fieldbus / PROFIBUS PA (Requires specific variant/model suffix). |
| Display & Local Interface | Integral LCD display showing %, mA, error codes; Push buttons for calibration, configuration, air flow adjustment. |
| Split Ranging | Configurable (e.g., 4-12mA / 12-20mA) |
| Action | Direct (Air-to-Open) or Reverse (Air-to-Close) - Configurable. |
| Fail-Safe Action | Configurable position upon signal or air failure (e.g., hold last position, open, close - depends on actuator/accessories). |
| Approximate Weight | 0.8 - 1.5 kg (1.8 - 3.3 lbs) (Depends on housing material). |
| Typical Applications | Control valves in process industries (Oil & Gas, Chemical, Petrochemical, Power, Water Treatment, Pharma). |
Xiamen ZhiCheng Automation Technology Co., Ltd is a leading global supplier of control system components. We specialize in control systems and drives.
More about us, you can view our official website: www.zcsensors.com
Follow us:
With many years of experience in the industrial sector, we consistently deliver the highest quality of spare parts which make sure that all jobs are perfectly.
We are major in PLC, Sensors, HIM, Transmitters.
Best Supply Brands As Following: 1) Bently nevada, 2) +GF+, 3) Roseount, 4) ABB, 5) Alen-Braley, 6) Foxboro.
Good working environment, perfect team, sincere cooperation →→ Achieve you and our success!!!
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.