PA6 Nylon 6 Resin Pellets - 30% Glass Fiber Reinforced, Black Color, Injection Molding Grade
Product Introduction
PA6 Nylon 6 Resin Pellets - 30% Glass Fiber Reinforced, Black Color, Injection Molding Grade is a high-performance engineering thermoplastic compound designed for demanding applications. This material combines the excellent base properties of Polyamide 6 (Nylon 6)—such as good toughness, wear resistance, and chemical resistance—with the significant mechanical enhancements provided by 30% glass fiber reinforcement.
The incorporation of glass fibers results in a dramatic improvement in tensile strength, stiffness (modulus), and dimensional stability, particularly under heat and load. The material exhibits reduced creep, lower thermal expansion, and superior long-term performance compared to unfilled PA6. The standard black color, often achieved with carbon black pigment, provides UV protection and a consistent, market-preferred appearance. This compound is specifically formulated and pelletized for optimal processing in conventional injection molding machines, ensuring excellent flow characteristics, fast cycle times, and reliable part production.
Key Features:
-
High Strength & Stiffness: 30% glass fiber fill significantly increases mechanical strength and rigidity.
-
Enhanced Dimensional Stability: Low shrinkage and warpage, excellent for precision parts.
-
Good Heat Resistance: Maintains properties at elevated temperatures; higher Heat Deflection Temperature (HDT) than unfilled PA6.
-
Improved Creep Resistance: Performs well under sustained mechanical stress.
-
Excellent Wear & Abrasion Resistance: Inherited from the base PA6 matrix.
-
Good Chemical Resistance: Resistant to many oils, fuels, and solvents.
-
Optimized for Injection Molding: Designed for easy processing, fast setup, and high productivity.
| Material | 100% nylon(PA6,PA66 chips) staple fiber, high hardness |
| Size | Nylon fiber from 1.2D~80D |
| Cut Length | 38mm~120mm |
| Color | White or black |
| Shape | Trilobal, round, hollow, flat |
| Luster | Bright, Dull, Semi-dull |
| Feature | Anti static electricity, Good hygroscopicity, Bright and soft color |
| Advantages | Full export experience, Meet Europe standard: without APEO, NPEO, OBA, GRS certificate is making currently, Fast delivery time |
| Test description | unit | Target | Tolerances |
|---|---|---|---|
| Effective titre | dtex | 1.33 | 1.25-1.38 |
| Tenacity | cN/dtex | 4.21 | 4.00-4.50 |
| Elongation | CV(%) | 80.6 | 80-100 |
| cut length | mm | 32.0 | 30-34 |
| Defect | mg/100g | 1.7 | 1.7-2.1 |
| No of Crimp | 2.5/cm | 8.5 | 8-12 |
| Melting Point | ℃ | 243 | 240-250 |
| Dampening rate | % | 4.5 | 4.4-4.5 |
| Moisture | % | 4.3 | 4.0-4.5 |
| Shrinkage 98℃ water | % | 1.8 | ≤2.5 |
| Oil finish | % | 0.37 | 0.10-0.15 |
| Silicone oil | % | non | non |
This 30% glass-fiber reinforced PA6 is a versatile workhorse material in industries that require a balance of strength, durability, and cost-effectiveness. Its primary applications include:
1. Automotive Components:
-
Under-the-hood: Engine covers, air intake manifolds, radiator end tanks, cooling fans.
-
Structural & Functional: Door handles, mirror housings, gears, pulleys, and brackets.
-
Fuel Systems: Fuel line clips and housings.
2. Electrical & Electronics (E&E):
-
Enclosures & Housings: Connectors, circuit breakers, switches, and housings for power tools and appliances where rigidity and heat resistance are needed.
-
Structural Insulators: Coil bobbins, terminal blocks.
3. Industrial Machinery & Equipment:
-
Gears, Bearings, and Bushings: Especially where lubrication is not feasible or where high wear resistance is required.
-
Machine Housings and Guards: Lightweight, strong covers and frames.
-
Material Handling: Conveyor components, rollers, and fasteners.
4. Consumer Goods & Power Tools:
-
Housings for: Lawnmowers, trimmers, drills, and other motorized equipment requiring high impact strength and stiffness.
-
Functional Parts: Moving components within appliances.
5. General Engineering & Custom Parts:
-
-
Any application requiring a strong, stiff, and durable plastic component that can be precision-molded into complex shapes, from industrial fittings to sporting goods equipment.
-
- Weaving bag, 200kg per bale, size: 115*95*75cm
- Material of pack: weaving bag, Plastic tape will be used
- 8 tons for 20'ft Container; 20 tons for 40HQ Container
ISO9001, INTERTEK
- Experience: Many years' experience in Virgin Nylon Fiber industry
- Various Products: Various specifications to meet every requirement
- Cost Control: Special processing technology to reduce costs
- High Quality: Best-selling nylon fiber with top market position
- Feedback: High satisfaction and global market share
- Best Service: Comprehensive email and phone support with long-term service plans
- Good elasticity and grade A quality
- Bright & soft color
- Better anti static electricity
30% T/T as deposit 70% T/T before shipment or LC at sight, others are negotiable.
Free samples always could be sent to you for your evaluation.
8 Ton
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.