Hydro Power Generator Wheel Stainless Steel Turbine Wheel Micro Pelton Turbine Runner

Pelton Turbine Runner

Manufacturer Hydro Power Generator Wheel Stainless Steel Turbine Wheel Customized Micro Pelton Turbine Runner

Product Paramenters

Product Name:

High Quality and Nice Price Pelton Turbine, CNC Machining Hydro Turbine Runner Pelton Wheel Turbine Runner Generator Made in China.

Processing process: make a sample according to the cross-section size of the water cutting edge, use the sample to draw a line on the large plane of the water bucket, turn the center of the runner on the vertical lathe according to the size of the runner, and turn it on the runner water bucket check with template;

It is characterized by at least one hoop in the outer circle of the runner, which connects adjacent water buckets to each other, and the said hoop is a circular hoop, located at the maximum radius of the runner. The advantage is that without changing the structure and production process of the traditional impact type runner, the stress condition of the water bucket is changed to fundamentally solve the problem that the stress concentration at the root of the water bucket is easy to produce fatigue cracks and then expand and finally break, and the cost is small, low, basically no need to add any new processing equipment, short processing cycle, suitable for the production of small and medium-sized hydraulic turbine production enterprises, low investment, high efficiency.

The existing impact turbine runners are composed of a wheel and a water hopper, and their structure has the following three main forms:

1. Integrated runner;

2. Combination runner;

3. Cast and welded runners

Application

Production process:

What Kind of hydropower generator units should I choose?

All of our products are customized. We have more than 15 yeras experience on design and manufacture of hydro turbine. And we have served for more than 500 HPPs. We could design and customized products according to your informations or requirements. All of our products are strictly designed and manufactured under ISO,TUV and CE.

Could you please send me below parameters, so our engineers could offer the best suggestions for your project?

Where is the plant?

1. Design head: ___m

2. Design flow: ___m³/s

3. Frequency: 50Hz or 60Hz?

4. Unit Capacity: ___KW；How many kw each unit? How many units?

5. Power factor COSφ:

6. Generator output voltage: __V

7. On-grid or Off-grid type? (On-grid type voltage: ____Kv)

8. M.a.s.l: ___ m

9. Basic situation about the project and your company introduction.