BD-D93-002ZII Full Automatic closed flash point tester 

Applicable standard

GB/T 261-2008, ASTM D93 (A and B methods), ISO 2719

Performance characteristics

•  PLC automatic detection, control, temperature programming, automatic ignition and judgment of flash point, test results can be stored, printed, downloaded, the entire test process without the need for personnel participation.
•  7-inch color LCD touch screen, full English operation interface.
•  With automatic lifting lid function, easy to operate.
•  The stirring device is designed by the national patent. The stepping motor is used for sample stirring, and the rotation speed is stable and adjustable. It can be tested by A and B methods.
•  Built-in atmospheric pressure sensor can automatically correct the measurement result according to the measured atmospheric pressure.
•  with automatic cooling to improve cooling efficiency <. Depending on the user's needs, the software and interface to connect to the LIMS system is optional.

Technical indicators

•  power supply: AC220V±10% 50Hz
•  Measurement range: 40 ~ 300 ° C
•  sensor accuracy: 2‰
•  flash point detection: miniature thermocouple
•  heating rate:
•  Method A: 5 to 6 ° C / min
•  Method B: 1 to 1.5 ° C / min
•  heater power: 600W
•  stirring speed: Method A: 90 ~ 120r / min, Method B: 240 ~ 260r / min
•  gas source: liquefied petroleum gas, propane
•  Dimensions: 240 × 410 × 39 (mm)