316L Stainless Steel High Temperature 200°C Conductivity TDS Sensor with 20 μS/cm Range and NPT3/4 Interface
Professional-grade 316L stainless steel conductivity sensor designed for extreme temperature applications up to 200°C with precise 20 μS/cm measurement capability.
| Parameter | Specification |
|---|---|
| Conductivity Range | 0.01~20 μS/cm |
| Resistivity Range | 0.01~18.2 MΩ*cm |
| Electrode Configuration | 2-pole design |
| Electrode Constant | K ≈ 0.01 |
| Construction Material | 316L Stainless Steel |
| Operating Temperature | 0°C~200°C |
| Pressure Rating | 0~2.0 MPa |
| Temperature Sensor | PT1000 |
| Installation Interface | NPT 3/4" |
| Cable Length | Standard 10 meters |
This conductivity sensor operates on the principle that dissolved salts in water exist as ions, which migrate toward electrodes when electrical current is applied. The resulting electrical conduction provides a direct measurement of total dissolved solids (TDS) concentration.
Conductivity serves as the reciprocal of resistivity and represents a critical water quality parameter. The sensor's design accounts for temperature dependence, with specific conductance standardized to 25°C for consistent measurements across varying conditions.
- Sidewall Installation: Ensure interface tilt angle exceeds 15 degrees
- Top Flange Installation: Consider flange dimensions and electrode insertion depth
- Pipe Installation: Account for pipe diameter, flow velocity, and pressure conditions
- Flow-Through Installation: Monitor flow velocity and pressure parameters
- Submersion Installation: Adjust bracket length according to application requirements
Before installation, unscrew the electrode protective cap and use appropriate mounting brackets or accessories as shown.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.