SS316L High Pressure Conductivity Sensor 5000μS/cm Range with 2.0MPa Rating for Water Quality Monitoring
| Parameter | Specification |
|---|---|
| Conductivity Range | 1~5000 μS/cm |
| Electrode Configuration | 2-pole design |
| Electrode Constant | K≈0.1 |
| Wetted Material | 316L Stainless Steel |
| Operating Temperature | 0~80℃ |
| Pressure Rating | 0~2.0 MPa |
| Temperature Sensor Options | NTC10K / NTC2.2K / PT100 / PT1000 |
| Installation Interface | Upper NPT3/4, Lower NPT1/2 |
| Electrode Cable | Standard 10 meters |
This conductivity sensor operates on the principle that dissolved salts in water exist as ions, which move in specific directions when an electric field is applied. The anions migrate toward the anode, enabling electrical conduction through the aqueous solution.
Conductivity represents the reciprocal of resistivity and serves as a critical indicator for assessing water quality by measuring total dissolved salt content. The degree of electrical conduction varies with electrolyte concentration, allowing analysis of solution solubility.
The sensor accounts for temperature dependence, with conductivity measurements standardized to 25°C for consistent readings across different environmental conditions.
- Sidewall Installation: Ensure interface tilt angle exceeds 15 degrees for optimal performance
- Top Flange Installation: Consider flange dimensions and electrode insertion depth requirements
- Pipe Installation: Account for pipe diameter, flow velocity, and pressure conditions
- Flow-Through Installation: Monitor flow velocity and pressure parameters
- Submersion Installation: Adjust bracket length according to application requirements
Installation Note: Remove electrode protective cap before installation and use appropriate mounting brackets or accessories.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.